Description:

400HP Nitrous Express 90mm plate kit for LS engine. This kit has all the parts to deliver a true 400HP hit. NO2 solenoid has a bottom exit for higher flow. Plate is good for 400HP and has option for two stages. Bottle has a Hi-Flow valve good to 500HP. I will provide three sets of jets that you can choose from my collection. Everything works, and if you are local, the solenoids can be bench tested before you buy.

I have an assortment of supply lines and fittings so if you know how you want to set it up, I would be happy to provide the lines and fittings for your setup.

Includes:
NX nitrous and fuel solenoids as well as Parker purge solenoid, purge line and switch.
NOS bottle heater with temperature sensor
Zex 10# bottle with NOS Hi-Flow valve and pressure gauge
Bottle mounting brackets
14' -4AN nitrous line
-4AN to -3AN supply lines
EFI adapters and -4 fuel supply line
Arming and purge switches and relay
Low fuel pressure cutoff
Colored wire
Does not have microswitch because I used a controller. Microswitches are pretty cheap, but at this power level, you probably want to use a controller.