Description:

all parts i bought new and have 3000 miles on them. removed them all due to a lash cap falling off and wearing down the one titanium valve. found it in time so no damage to anything besides the valve. despite changing the oil twice after the install there is still zinc assembly lube on some parts. the setup made 460 wheel through an M6 9 inch fbody.

https://ls1tech.com/forums/dynamomet...got-heads.html

ported 799s, no sensors or bolts included. i believe they are ported to 227 or 229. they are not milled. lash caps included. these are the wegner nascar castings. see pic for the damage. will need 1 new valve, retainer and locks. the heads have the psi beehives, and del west titanium valves. attempted to clean off to show they say del west on the, but after a few minutes i got impatient and only got it to say west. i took a real quick wipe in the chamber with some carb cleaner and the carbon really comes off easy. i used GM MLS gaskets and everything wipes off real easy so i would think no reason to disassemble and have a machine shop clean it. if i were putting it back on, i would just clean them up by hand, fix the valve, and reassemble. $850 plus shipping. i think thats a decent price since AI 243s are 1200 plus shipping both ways if you already have a pair of heads.

Morel drop in lifters, 5315, 6504, these use lifter trays, SOLD

ws6 trunion upgraded rockers, they used new rockers and put in their own trunion upgrade. rocker bolts not included SOLD!!

tick 7.300 rods, seem very short i know but thats what i came up with. keep in mind tho that the valves stick up much higher than stock valves especially with the added lash cap, they got me in the the .050-.065 range hot preload of the morels. $65 shipped

gm rocker stands. $25 shipped

gm ls1/2/6 trays with bolts, 3000 miles like the rest, SOLD

ARP 6 point head bolts SOLD

msd wires, 7 are good, 1 burnt through so im just goona sell them for $8 each PayPal gift shipped for those who may have not bent them far enough from the headers like me. or make an offer for all if you want.

the injectors and fast are located here

https://ls1tech.com/forums/market/1910472

the 2 freebies are a truck maf that has 1 of those little tiny "bridge" wires that is broke off the one side. assuming maybe you can reattach it since its still connected on one side. also have a stock antenna from my camaro in the pic.