LS7 447 Stroker Engine W/ Accessories NEW
12-20-2018, 01:52 PM | Replies: 11 | Views: 3516
-
Price
$9,999
- Location Crete, NE, 68333, USA
Description:
LS7 447 Stroker Longblock NEW
$9999 + freight shipping
Fully Forged Eagle Rotating Assembly (ESP-12833)
ARP Head Studs
ARP Crank Studs
All Cylinders have been bored to 4.155" (block has been re-sleeved)
Block/heads decked .005"
Upgraded Cam (Cam Motion LS7 stage 3)
Ferra Valves
Dual Valve Springs & Titanium Retainers
Custom CNC'd LS7 Heads
H-beam rods 6.125"
4.125" stroke
Eagle 4340 Forged Crank
Carillo Pistions (upgraded to a dome) - Compression 10.8:1
58 tooth reluctor
The oil pan setup is the dry sump system and includes the dry sump tank
**ECM and gas pedal are not shown in the photos**
Stainless Steel Mid Length Hooker (93-02 F-body) 1 7/8" Primary (3" Collector) Headers (Included but not shown!!!)
Original block had 8k mile on it. The heads have about 2500 miles on them since the CNC job. The rotating assembly, and complete accessory drive are all Brand new.
Priced to sell.
Send a message or feel free to text me if your interested.
402-560-4695
I will freight this anywhere in the us (AK and HI additional charges will apply). Freight is flat rate $250 and is to a Commercial business address (with a dock or forklift) or to a nearby terminal for customer pickup. This is already crated and ready to ship!
This setup is located around the Lincoln Nebraska area.
Please PM me if your interested. I have this priced to sell. Comes with the machine shop receipt from the build as well as a warranty.
$9999 + freight shipping
Fully Forged Eagle Rotating Assembly (ESP-12833)
ARP Head Studs
ARP Crank Studs
All Cylinders have been bored to 4.155" (block has been re-sleeved)
Block/heads decked .005"
Upgraded Cam (Cam Motion LS7 stage 3)
Ferra Valves
Dual Valve Springs & Titanium Retainers
Custom CNC'd LS7 Heads
H-beam rods 6.125"
4.125" stroke
Eagle 4340 Forged Crank
Carillo Pistions (upgraded to a dome) - Compression 10.8:1
58 tooth reluctor
The oil pan setup is the dry sump system and includes the dry sump tank
**ECM and gas pedal are not shown in the photos**
Stainless Steel Mid Length Hooker (93-02 F-body) 1 7/8" Primary (3" Collector) Headers (Included but not shown!!!)
Original block had 8k mile on it. The heads have about 2500 miles on them since the CNC job. The rotating assembly, and complete accessory drive are all Brand new.
Priced to sell.
Send a message or feel free to text me if your interested.
402-560-4695
I will freight this anywhere in the us (AK and HI additional charges will apply). Freight is flat rate $250 and is to a Commercial business address (with a dock or forklift) or to a nearby terminal for customer pickup. This is already crated and ready to ship!
This setup is located around the Lincoln Nebraska area.
Please PM me if your interested. I have this priced to sell. Comes with the machine shop receipt from the build as well as a warranty.
Last edited by andrew69_04; 12-23-2018 at 07:22 PM.
Reply