|
wiseco 4.155 pistons, callies h beams
i never ran this motor, i bought it just for the block since i know ERL quality was top notch. i ended up finding an ERL short block already setup for n/a new ready to go. i have no paperwork for this motor but will repeat what the previous owner had told me.
blueprinted ERL 6.0 ls2 block, darton sleeves 4.155 bore. previous owner was using it with a turbo. he wanted to move onto a 6 bolt block to make more boost. he had about 5500 miles. i would highly recommend a full tear down to inspect everything. was running when he pulled it, and it cranks by hand with no issues. SOLD crank is a callies compstar number AW0317-CS, 24T reluctor. SOLD Callies compstar H-beam rods, ARP 2000 bolts. the one pic i tried to get a visual of the rods and the compstar logo. would really like to sell these with the pistons. rods and bolts $500 shipped plus fees pistons are wiseco. they 4.155 for 4 inch stroke. there is a number on them but pretty useless. as of now $525 plus shipping and fees. will do pistons and rods for 800 shipped and ill cover PayPal. the cam specs are in one of the pics, it is a turbo grind, checked all the lobes and bearing surface and has no gouges, nice and smooth with some marks. $235 SOLD |
Pm sent
|
more pics. these are certainly wiseco but basically all the paint is off. but can still tell.
https://cimg3.ibsrv.net/gimg/ls1tech...744a3cfb9c.jpg https://cimg4.ibsrv.net/gimg/ls1tech...bd3502a597.jpg https://cimg5.ibsrv.net/gimg/ls1tech...b1f4ad2c7c.jpg https://cimg6.ibsrv.net/gimg/ls1tech...e97202a5dc.jpg https://cimg7.ibsrv.net/gimg/ls1tech...d15c51bd6c.jpg https://cimg8.ibsrv.net/gimg/ls1tech...3282ba1059.jpg https://cimg4.ibsrv.net/gimg/ls1tech...0d5a175e0b.jpg |
bump.
|
How much run time on the rods ? 270-792-5025
|
bump.
|
piston ad rods are at the machine shop getting cleaned and sperated. will post up updated pics soon
|
Bump.
|
| All times are GMT -5. The time now is 08:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands