Description:

combining my other threads into one since the other threads have sold items. these all have unknown miles unless noted.

Wiseco 4.155 pistons, dished for boost, unknown dish amount, but were inside of a twin turbo motor. they are cleaned from the machine shop. these are for 4" stroke and will include the wrist pins and spiral locks. one wrist pin has a groove in it. picture makes it look worse than it is. $350
compstar rods, 4 inch stroke, h-beam, fresh clean from the shop. comes with the arp 2000 bolts. they have numbers on the sides from when ERL blueprinted the motor and paired everything up SOLD!!!
PSI 1511 beehives, complete with seats, and titanium retainers. these were used on a spec motor, but were tested and were within specs and then i ran them for 3000 miles. they have light freckles on them and comes off with some scrubbing. basically one of the best beehive valve springs you can run. i believe these are the .625 max lift springs. $SOLD

a set of 8 intake and 8 exhaust valves, Del west titanium, also from a spec motor. the tips of the valves may need ground down a few thousandths due to some marks. forgot to have the shop clean them for me. they do come with the lash caps which i have been told are extremely tough to find, these things lock on good and tight, see the pic with me holding it upside down. also included is an extra del west valve i have . SOLD