Turbo 4.8 race truck
5 Attachment(s)
This is pretty much a race truck, no ac, heat, power steering, and the radio is not hooked up
Selling because I am taking a new job which will not allow the free time something like this needs Truck is very clean, not perfect by any means but body is over all in good shape Couple scratches on the paint, nothing crazy. I do believe the cab was pulled at some point and dropped off a lift so there are dents in each of the rockers. I do not have dyno numbers, I've only had one track outing with which the trans brake was not working and it trapped ~135mph on a very conservative tune. Definitely has the potential to run high 9's easily if you can get the short track down. I did not originally build this truck so the mods are listed to the best of my knowledge/what I could verify If you do not have indoor storage the truck does leak from the dash somewhere, I have a very nice cover to go with it but I just wanted to give full disclosure. I am listing this at $17,000 Located in Bowie MD Do us both a favor and READ THE WHOLE AD BEFORE CONTACTING ME. in the ad. I understand you may have specifically detailed questions but if you are not ready to buy then PLEASE do not waste my time SERIOUSLY READ THE AD BEFORE MESSAGING ME AND MAKE SURE YOU ARE READY TO PURCHASE. Engine: Stock bottom end 4.8, it is the later 24x engine with the gen 4 rods and pistons. Ljms stg 1 turbo cam, with dual springs and retainers Ls9 head gaskets with arp head studs Tbss intake manifold Ecu: Ms3pro engine management Pidash tablet dash Switch panel for starter, lights, fuel, acc, etc... Turbo kit: Stock flipped manifolds T6 Cast s475 1.10ar 5 to 4inch reducer, 4 inch exhaust right out the fender 60mm wastegate dumped to fender exit Mishimoto 4inch thick intercooler 50mm blow off valve Fuel system: 1000cc injectors 21ish gallon sumped fuel cell Large fuel labs external pump and filter Holley fuel rails -8 feed and -6 return Runs on e85 Trans: TCI built th400, reverse manual valve body with a trans brake Circle D converter, it's around a 3k stall but I do not know exactly 5 inch drive shaft with safety loop Have the trans cooler under the bed with a separate fan Rear: Currie bolt in ford 9 inch 3.73 gears with a steel housing Disc brakes Retains factory GM 6 lug pattern. Suspension: 2/4 drop via drop springs up front and shackle/hanger setup in the rear Generic drop shocks VAS traction bars Wheels: 15x10/ 17x4.5 race star dark star, MT 28in sportsman skinnies and 295/65r15 Also have a pair of steel wheels for front runners with normal size tires Attachment 715331 Attachment 715332 Attachment 715333 Attachment 715334 Attachment 715335 |
This looks like an awesome truck! Patrick wrote it up for the front page, so hopefully it'll get some eyeballs on it.
|
All times are GMT -5. The time now is 11:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands