Description:

OK, I have some parts to sell so let me know if you need anything listed. I might do some trading for certain items. I am looking for a Haltech 2500 Elite ECU, LS1 harness for the Haltech, 4 bar MAP sensor, Dash that works with the Haltech ecu. Possible other items for the Haltech system. We are also considering the Holly Dominator ecu setup.

Autometer Phantom.
5" speedo 250.00
5" tach 175.00
2 5/8" oil , mechanical 60.00
2 5/8" water temp, electric 60.00
Autometer 5291 speed sensor for speedo 60.00
Package deal on all these 500.00

Autometer procomp
Boost guage 75.00

AEM 30-4110 AFR, comes with original box and paperwork, gauge that has a black and white face plate, sensor and all wiring. You will only need a weld in sensor bung since I have used this one.
150.00

Switch panel NOT FOR SALE. Yet anyway.

Up and forward Jardine headers. LS. 1-5/8" tubes, 1/2" flange thickness and 2.25" collectors with Vbands and clamps. NEW and never run, these are badass headers. $800.00
I Can Ship these at buyers expense.

I have a set of 317 heads that will be sold ready to run. They just need to be cleaned and checked by my engine builder H Squared Race engines in Houston. They have about 10 to 15 1/8th mile passes on them since being freshened up and installing the Manley Severe Duty Race Flo valves. The spring kit is the BTR .660 Ti retainer spring kit. Rockers and stands are not included. One exhaust bolt hole has been tapped larger due to a header bolt breaking and it reguired a lot of work to get it out. This can be helicoiled easily. I never did because it wasnt causing me issues, I used a larger bolt. These have about 30 to 40 passes on them. And almost no street miles. The heads worked great on my 402" turbo setup. They are not ported. Engine was making about 1100+ crank at 23psi based on weight, ET and mph. Its a no prep NT truck so slips are rarely given to us. Asking $600.00 plus shipping which is about 50.00 and will come straight from my builder in Houston.

Tial 44mm wastegate. Ran this on my truck but had to get a larger gate. Works perfect and comes with extra springs. Also comes with flanges and clamps. $200.00 shipped.

FAKE Tial 60mm wastegate. I bought this and found out its a knockoff and is sold by many vendors like VS and others. They work fine but I dont need it. I went with a CO2 setup. The seller offered to buy it back but came down with cancer and has spent tons of time in the hospital so I am not pushing him on it. We are facebook friends. Im asking what I paid which is $300.00 shipped. Comes with flanges and clamps and never been installed.

Thank again for looking.