Description:

Putting out a feeler on my 1998 Chevy Corvette... Price is 20k, but theres wiggle room. Would consider trade on a C6 Grand Sport or Z06 with fixed heads (with me adding cash on my end ofcourse) New setup will be dynoed in the next few days and I'll post results. Mileage is roughly 56k. I dont need to sell it just entertaining offers as I'd like to get into a C6 eventually. Mileage will go up a bit as I do plan on driving the car as soon as the tune is finished. Will be tuned on 93 and E85 (tuned on VP X85 for consistency). This is a bad *** car, finally have most of the bugs worked out and its a solid performer. I fully expect the car to be deep in the 10s. It went 11.3 with a 1.58 60ft and a 3800 DA last year on the old setup. The car should be making around another 100hp now. Hope to be knocking on the door of the 9s. Serious inquiry's only please.
The details:
Performance:
- Studded 5.3 (80k miles) with Melling High Volume Oil Pump
- Ported 243 heads
- Texas Speed 228r cam(228/228 .600/600 on a 112 lsa)
- LS6 Intake
- XS Power long tube headers and catless mids
- Borla Stinger Catback
- Vortech V3si Blower with 3.4 inch pulley (makes between 12-14bs)
- 850cc LS3 body injectors with top hat extendors
- Level 7 RPM Trans with FTI 3800 Stall Convertor
- Factory Z06 3.42 rear diff
- Brand new Mickey Thompson Street S/S 285/40/18s in rear
- Like new Goodyear 275/40/18s in front.
- Derale 48000 btu stack plate trans cooler finished with -6 braided line
- ECS Stage 1 E85 capable fuel system.
- P59 ECU swap with Flex Fuel Enabled
- Continental Flex Fuel Sensor
- Powermaster 1 wire 200 amp Alternator
- GC Cooling 11 inch Fans and custom Shroud
- Turbo-Gaurd blower gaurd
- Tial 50mm wastegate (knockoff)

Appearance/Misc:
- Factory Arctic White paint (7/10 has some blemishes but great driver)
- Corvette Creations true carbon fiber Vortex front splitter and side skirts
- Factory black interior
- Custom Double Din console with Pioneer NEX double din head unit
- C6 Steering Wheel conversion (no airbags)
- C6 Shift **** adapted (push down to shift)
- C6 Z06 18 inch wheels
- Custom powdercoated Proform Valve Covers, Piping, and Blower
- Custom painted intake
- Coil Relocation (inside fender wells)
- Export style Tail Lights
- LED interior lighting (door lights, dash, hvac, and door switches)
- Custom one off HID Projectors built by Total Vision Concepts
- Custom Front bumper opening to support maximum air flow to supercharger and transmission cooling components
- Custom Fender covers matched to charge tubes in the engine bay.
- 20% tint all the way around (windshield not tinted)
- Pillar gauges (boost and fuel pressure) Glowshift but easily upgradable.