Track video from last night, new best
07-08-2006, 08:59 PM
#1
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Nov 2003
Location: Marysville, WA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
Track video from last night, new best I posted the details in the drag racing forum but here is the video, the SRT-4 is my buddy Ben:
http://ls1sounds.com/track/richmond/...ben_7-7-06.wmv
12.23 @ 110.84, 1.74 60ft. +825 DA
Cam only, Vig 2800, stock '98 heads and HGs, nearly full weight. I had the rear seat backs and seat belts out of the car, along with the spare and jack, and 1/4 tank of gas.
http://ls1sounds.com/track/richmond/...ben_7-7-06.wmv
12.23 @ 110.84, 1.74 60ft. +825 DA
Cam only, Vig 2800, stock '98 heads and HGs, nearly full weight. I had the rear seat backs and seat belts out of the car, along with the spare and jack, and 1/4 tank of gas.
07-08-2006, 09:07 PM
#3
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Nov 2003
Location: Marysville, WA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
Thanks unit. 
I'm thinking that the Vig 2800 is holding me back the most right now, followed by the '98 heads and then lack of time spent tuning.
I'm thinking that the Vig 2800 is holding me back the most right now, followed by the '98 heads and then lack of time spent tuning.
07-08-2006, 09:17 PM
#4
Administrator
No offense of course, but a 2800 stall is a waste of money IMO. I'd do a 3500
if I had a 4L60E again. You'll be knocking on 11's door. Ever consider a set of heads?
You now they're dirt cheap these days.
if I had a 4L60E again. You'll be knocking on 11's door. Ever consider a set of heads?
You now they're dirt cheap these days.
07-09-2006, 01:37 AM
#5
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Nov 2003
Location: Marysville, WA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
No offense taken, the Vig 2800 came with the car or I wouldn't have it; just haven't replaced it yet. The previous owner told me that it was a Vig 3200, but it has never once flashed above 3k. I'm either going to have it re-stalled, or get a YTP 4400 soon. Also been looking at the TSP PRC CNC LS6 heads a LOT lately.
07-09-2006, 11:03 AM
#7
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Nov 2003
Location: Marysville, WA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
Just updated the vid with a better description of the SRT-4's mods. It still has some power left on the table, the PCM is pulling timing due to MAP voltage from the extra boost. He's seeing around 10* advance in 4th gear, lol. Have to trick it with higher static FP and the SAFC, we're doing that this afternoon. His car impresses the crap out of me!
