Twin_Turbo

iTrader: (9)

Hey Darian ....., why do you not reply to ebay or email messages?

I bought a good slightly used cam motion custom roller cam from you.
This cam was just what I needed for my high revving 396 build (callies 3.875 crank, pankl billet rods, je custompistons, splayed main reworked roller block etc, dart pro1 230s,jesel shaft rockers, unik short runner individual runner stack EFI system, 2" into 3.5" headers...etc etc)

I figured hell, I can save a few dolalrs here...but man what a costly mistake.

I took delivery of the cam after sitting in my parts pile to be shipped to me (I'm in the Netherlands) and my buddy didn't inspect the cam too carefully, he said it was there sealed and looked good. So I gave you pos feedback. Wnyway, it's not good. IT's junk, 2 lobes are bad and you HAD to know this, it's just plain obvious. You can not sell people junk like this for top dollar.

these are your ebay pics
https://lh3.googleusercontent.com/V_...20-h1080-rw-no

https://lh3.googleusercontent.com/fy...20-h1080-rw-no


https://lh3.googleusercontent.com/U_...20-h1080-rw-no

clever photography

this is the piece of junk you sold me for 200 dollars
+ shippibg and gas money

https://lh3.googleusercontent.com/SZ...20-h1080-rw-no

https://lh3.googleusercontent.com/wZ...20-h1080-rw-no

https://lh3.googleusercontent.com/8r...20-h1080-rw-no

You said you were going to use this on your 396 build, I think you got it cheap somewhere and decvided it was a good way to defraud someone of his hard earned cash.

I made 3!!! payments, one for the agreed price, more for shipping and then some for you needing a little more because of paypal fees and what not.
Paid with
MCARD x-0834
You'll see "PAYPAL *WARRIORCUST WARRIORCUST" on your card statement.
Exchange rate
219,62 EUR = 230,00 USD
1 Euro = 1,05 US Dollar
Sent to
Karsten Neuhaeuser
16579 CORNER LAKE DR
Orlando, FL 32820
United States
Track your delivery
27 January 2016, Marked as shipped
Status: Shipped
Transaction ID
42405502FF062473L
Seller information
Darian .... ‏(warriorcustoms1972‏)
warriorcustoms@yahoo.com
Your purchase
SBC/LT1 solid roller cam...230,00 USD
Item #181997074978
Postage and Packaging0,00 USD
Tax0,00 USD
Purchase total230,00 USD
Fee0,00 USD
Total230,00 USD

Paid with
MCARD x-0834
You'll see "PAYPAL *WARRIORCUST WARRIORCUST" on your card statement.
Exchange rate
25,10 EUR = 26,28 USD
1 Euro = 1,05 US Dollar
Transaction ID
4CD974641P1024537
Sent to
Darian ......
warriorcustoms@yahoo.com
Details
Sent to Darian .... 25,00 USD
Fee1,28 USD
Total26,28 USD

Paid with
MCARD x-0834
You'll see "PAYPAL *WARRIORCUST" on your card statement.
Transaction ID
4CF380233N623063W
Sent to
Darian .....
warriorcustoms@yahoo.com
Note to Darian A......
additional funds
Details
Sent to Darian ....41,00 EUR
Fee1,95 EUR
Total42,95 EUR

Twin_Turbo

iTrader: (9)

https://ls1tech.com/forums/lt1-lt4-m...l#post18185194

That's the cam right there in your post. Bragging about it.

and here
https://ls1tech.com/forums/lt1-lt4-m...l#post16732551

https://ls1tech.com/forums/lt1-lt4-m...l#post16822540

warriorcustoms

iTrader: (10)

I bought that cam off here & never installed it... I checked Every Lobe before shipping to make sure the thing wasnt Rusted from setting in the closet for 2yrs & it was Good!!! Then like 4 mos After the Sale You send Pics that look like You Ran it with the Smaller Springs I tried to talk You out Of doin & It looks like You Valve Floated the ****** thing!!! I was gonna use it in My 396 but didnt wanna have Valve Springs as a Yearly Maint. regumate with those Aggressive Ramps!!! Thats Why I Sold it Not because it was fucked Up You Did that On Yer End!!! So **** Off My Trader Rating on Here is Flawless ****** Cry Baby...

Twin_Turbo

iTrader: (9)

I never ran the thing. The cam was lying at my buddies to ship with the rest of my stuff. The engine isnt even complete. And I never intended to run small springs. I have 700 lift capable ultra ckean wire springs.

You never checked it or are ffing blind. These lobes were worn as shown when it got here. If I wrecked it myself I would not have opened a complaint. You purposely photographed it at such an angle that the messed up lobes are not visible. For instance the last lobe before the gear conveniently aimed down so the troughing/brinneling is not visible.

When I sent you pics of the worn lobes you said you couldnt see anything in the small pics. They were 1600 resolution. More testimony that you must be blind.

You are simply a crook selling off junk you bought for cheap at top dollar. BSing you ran it in your awesome 396. All lies... it never ran. Just a closet full of junk bullshit and pipe dreams.

I hope you choke in your rip off money you *****.

Twin_Turbo

iTrader: (9)

Heres your BS ....