h8tulooze

iTrader: (2)

This is a complete engine minus the ECM and 50-60k on it. Runs great, is it worth it? How would I get a ECM for it? Dealer? What specs would it come with? 320Hp, LS6 intake, etc?

Thanks

blk/slvr02ss

iTrader: (21)

Kind of high price.You can get ECM for a 2000 out a wrecked car or junk yard ,E-bay or off this Forum. HP around 330 @ the crank. No LS-6 intake unless they changed it.

samson_420

iTrader: (1)

A Grand sound like a decent price to me. Considering a complete pull out with the PCM and a trans. is around 3500 Bucks.

SmurfLSX

iTrader: (9)

i have an ecm and wirring harness for 300 pm me

h8tulooze

iTrader: (2)

Picked one up for $80 off ebay.

the_merv

iTrader: (88)

PCM's are cheap, I got mine for $60, 2002 one too..

Leandres629

I work at a salvage yard and your best bet is to purchase an PCM from your local salvage yard. Shouldn't be more than $70. If your LS1 is out of a 2000 it does not have the ls6 intake, only the 2001 and 2002 had the ls6 intake unless it was changed from the previous owner. I know that i once sold a used ls1 for $1700 with 70k from the salvage yard. But i think 1100 sounds pretty fair but you can find ones for less out there.

h8tulooze

iTrader: (2)

OK now that I have this motor, what mods should or do I need to make roughly 400-450HP to drive around town. I know later I will intake and carb this motor.

I heard LS2 timing chain, HV ported oil pump, 243 Heads, LS6 intake?