oil cap issue with frc's
#1
Teching In
Thread Starter
Join Date: Jun 2010
Location: Paterson, NJ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
oil cap issue with frc's
HELLO ALL
Having a bit of an issue with my fuel rail covers and my oil cap. I finally got the frc's on, but I noticed that my oil cap barely clears it. I've seen a few people put an extension or a neck on their oil cap so it clears the covers better. Can any one point me in the direction of where I can pick something like this up? I've checked autozone but they have no clue as to what I'm talking about thanks in advance
Having a bit of an issue with my fuel rail covers and my oil cap. I finally got the frc's on, but I noticed that my oil cap barely clears it. I've seen a few people put an extension or a neck on their oil cap so it clears the covers better. Can any one point me in the direction of where I can pick something like this up? I've checked autozone but they have no clue as to what I'm talking about thanks in advance
#2
TECH Junkie
iTrader: (104)
Fix the problem, don't 'band-aid' with some stupid extension.
If they/FRC's are not sitting down far enough, then you have an issue with something holding them up.
Check the AIR tubing off the exhaust manifold & make sure it is pulled out away from the engine far enough to clear the covers.
If they/FRC's are not sitting down far enough, then you have an issue with something holding them up.
Check the AIR tubing off the exhaust manifold & make sure it is pulled out away from the engine far enough to clear the covers.