Believe i have the build
01-28-2011, 08:52 PM
#1
Teching In
Thread Starter
Join Date: Jan 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Believe i have the build so i recently posted a question about the 5.3 but have decided when i get my hands on an lq4 that i will be going with the following setup(pretty cookie cutter)
Lq4
efi
ls3 intake
LG g6x3 cam
l92 heads
4l80e
(debating on 4.10s or 3.73s in the rear)
im pretty new to building a motor but figured this would be a good introductory build to get my foot into the door of the LS community.
if i run into any problems during the setup is this forum pretty forgiving when asking newbie questions?
Lq4
efi
ls3 intake
LG g6x3 cam
l92 heads
4l80e
(debating on 4.10s or 3.73s in the rear)
im pretty new to building a motor but figured this would be a good introductory build to get my foot into the door of the LS community.
if i run into any problems during the setup is this forum pretty forgiving when asking newbie questions?
01-29-2011, 12:12 AM
#3
Teching In
Thread Starter
Join Date: Jan 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
im still really unfamiliar with all the better parts for the ls engines. and i really havent figured out a stall. gonna call the company i buy my stall from. this vehicle is gonna be for street/strip and weekend cruiser in the summer. its probably gonna go into a 67-72 c10
this the intake u are talking about?
http://www.jegs.com/i/FAST/244/146302K/10002/-1
this the intake u are talking about?
http://www.jegs.com/i/FAST/244/146302K/10002/-1
Last edited by kgkleader; 01-29-2011 at 12:27 AM.
01-29-2011, 11:19 AM
#5
Teching In
Thread Starter
Join Date: Jan 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
