demonpixel

iTrader: (19)

On the back of my alternator, there's a single red wire that has a wire loom around it:



It's part of the fuel pump upgrade wiring harness kit I got from Nasty Performance. I think the PN for it is PN FLT1-FPWH. Anyway...

I need another one of these long looms for a single wire (I have the wire, just need the black plastic wire loom sheath that goes around it). I checked Oreilly's and Autozone, NO DICE.

Does anyone know where to find this thing by any chance?

Also, I'm not sure what those plastic things are called. I call them wire looms.

Thanks for any help/advice; I know this is a weird question.

01ssreda4

iTrader: (96)

The covering? I buy it in bulk from Part Express. Excellent prices.

Snake_Skinner

iTrader: (12)

Yahoo is ur friend play with him.

TheSilverOne

iTrader: (22)

wire loom or wire conduit = proper name. too bad we don't live closer, i have about 500 ft of it i want to sell.

myk

iTrader: (4)

Did you try NAPA? That's where I got some of my......conduit? when I Frankenstein'd the wiring in my Dodge's ignition wiring and headlight harness. If you decide to try NAPA go to the one here: 7440 Convoy Court, 92111. It's like a super-NAPA or something, although even these guys couldn't find a little rubber elbow that fits into my 97Z's emissions b.s..

demonpixel

iTrader: (19)

Badass, thanks for all the responses. Myk, I'll check out that NAPA later today man, thanks.

SilverOne, if they don't have it, would you mind if I just buy some of yours? You have some for a single wire right?

demonpixel

iTrader: (19)

Ok, got it from the horse's mouth - I emailed Racetronix and asked them. They said the smallest wrie loom they had was 1/4". Boo.

The pro-touring guys though said that what I needed was 1/8" loom and they found some on ebay. So I just ordered this: http://cgi.ebay.com/ebaymotors/ws/eB...9#ht_500wt_956

The description says that it's good for single wire installations, so it looks ok to me.

Thanks again for all the help!

Racetronix

iTrader: (2)

We told you your Racetronix harness uses 1/4" loom to cover the 10G wire. Polyethylene loom is low-temp cheap stuff. We only use Nylon loom.

demonpixel

iTrader: (19)

And I told you that I actually put a 10g wire inside of a 1/4" loom, and it was still too large. So unless your 1/4" loom is smaller than the 1/4" loom at a parts store, I don't see how that's the correct loom, sorry.

My 1/8" loom came in the mail and I took a pic of it with 10 gage wire inside of it. The fit is perfect, just like the first pic I posted.

Here is the pic: