JacksonWs6

My ws6 has an e-cut out welded in and wired up. But there is no switch on the end of the wire. The cut out functions when I hook my booster pack up to it, but it is becoming a pain to open and close. Does anyone know what switch I can use, or if there is one that will plug into the existing end?

TyCZ28

QTP Toggle Switch. that should be the one you need... if you have 2 of the plugs you took a picture of you will need the (QTP Switch2)

JacksonWs6

There is only that wire running from the cut out to under the seat. Does that switch run to the battery then?

TyCZ28

ok thats the style you need then for a single QTP cutout.. the red wire runs to a power source..