01 SS Dyno freak
06-04-2006, 03:52 PM
#1
Teching In
Thread Starter
Join Date: Jul 2005
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
01 SS Dyno freak So the club went out to Doug Rippie Motorsports for a dyno day. So I bring my new 01 SS that I picked up about a week ago. The car is stock beside the CME that it came with and a SLP lid that the owner before me put on it. I pulled 330 HP and 346 TQ but was running WAY to lean at 14 to 1. So with a little tuning by Doug and a couple more pulls we had the A/F perfect and picked up another 8 HP and 9 tq. So at 338 HP and 355 TQ is my car just a freak or is that just where it should be. Thanks -Steve
06-04-2006, 04:14 PM
#3
Originally Posted by BuddyZ28
So the club went out to Doug Rippie Motorsports for a dyno day. So I bring my new 01 SS that I picked up about a week ago. The car is stock beside the CME that it came with and a SLP lid that the owner before me put on it. I pulled 330 HP and 346 TQ but was running WAY to lean at 14 to 1. So with a little tuning by Doug and a couple more pulls we had the A/F perfect and picked up another 8 HP and 9 tq. So at 338 HP and 355 TQ is my car just a freak or is that just where it should be. Thanks -Steve
It made 336/350 with a lid and catback and no tuning.
06-04-2006, 04:35 PM
#5
TECH Enthusiast
iTrader: (5)
Join Date: Jan 2006
Location: seymour indiana
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
mine must be a freak too then becuase mine made those kind of numbers with SLP lid/LMII and no tune...with my current mods and no spray it make 409/456 on the juice it makes 523/579....have to get some suspension work....the times below are on stock suspension and DR's....it wheels hops way to bad on the slicks so that tells me i need some suspension work and maybe a set of gears before the slicks will come in handy
Trending Topics
06-04-2006, 05:56 PM
#10
Administrator
All these "freaks" still run the normal stock LS1 ET's at the track, so I question
the power output. We all know that dynos can lie. If you run a 12.60 @ 111mph, I'll buy it.
the power output. We all know that dynos can lie. If you run a 12.60 @ 111mph, I'll buy it.
06-04-2006, 05:59 PM
#11
Originally Posted by thislswon
mine must be a freak too then becuase mine made those kind of numbers with SLP lid/LMII and no tune...with my current mods and no spray it make 409/456
Doodad: No, we are saying a strong 01-02 LS1 makes high 330's hp.
The dyno's def have an effect also..
06-04-2006, 06:22 PM
#12
Originally Posted by unit213
All these "freaks" still run the normal stock LS1 ET's at the track, so I question
the power output. We all know that dynos can lie. If you run a 12.60 @ 111mph, I'll buy it.
the power output. We all know that dynos can lie. If you run a 12.60 @ 111mph, I'll buy it.
mines runnin good granted its got 50k+
06-04-2006, 06:40 PM
#13
TECH Enthusiast
iTrader: (5)
Join Date: Jan 2006
Location: seymour indiana
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
mods are in my sig minus tranny cooler,thermos,colder plugs,small **** like that...and my car went 8.29@88.xxx 60Ft-2.015 Reaction-.006 and that was no lid/catback or nuttin...bone stock down to the paper filter and it was my first time at the track and full weight on street tires!!
06-04-2006, 09:34 PM
#16
Administrator
Originally Posted by qwikz28
lid/catback 331/351 and still trapped 111 (spinning like a **** on an unprepped track.
13.0 @ 111mph, but only 13.67 @ 105mph stock if I recall correctly.
My point is that dyno numbers vary greatly. From what I've seen, and
I've seen a lot, these "dyno freaks" don't run the number at the track
which leads me to believe they really aren't freaks.
06-04-2006, 10:42 PM
#17
Originally Posted by unit213
Right...but that's not stock now is it. My lid / catback A4 LS1 went
13.0 @ 111mph, but only 13.67 @ 105mph stock if I recall correctly.
My point is that dyno numbers vary greatly. From what I've seen, and
I've seen a lot, these "dyno freaks" don't run the number at the track
which leads me to believe they really aren't freaks.
13.0 @ 111mph, but only 13.67 @ 105mph stock if I recall correctly.
My point is that dyno numbers vary greatly. From what I've seen, and
I've seen a lot, these "dyno freaks" don't run the number at the track
which leads me to believe they really aren't freaks.
it wasnt so much my figures that i was happy about. it was really my a/f was a perfect straight line. it was lean as hell but perfectly straight none-the-less. honestly i dont know if thats good or not but it made me happy damnit!
06-05-2006, 01:18 AM
#18
My 01 ram air did 333/346 with stock lid and Borla. Nothing but the exhaust on it. guy that dynoed right after me in a 02 did 334/342 with just exhaust and lid. So i think thats about the going rate on stock power. I ran 8.30 with just the exhaust too and 7.89 full bolt ons cept pulley and water pump. with some worn out BFG's.
06-05-2006, 03:22 AM
#19
TECH Fanatic
Join Date: Nov 2001
Location: Holly Springs NC
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unit213
Right...but that's not stock now is it. My lid / catback A4 LS1 went
13.0 @ 111mph, but only 13.67 @ 105mph stock if I recall correctly.
My point is that dyno numbers vary greatly. From what I've seen, and
I've seen a lot, these "dyno freaks" don't run the number at the track
which leads me to believe they really aren't freaks.
13.0 @ 111mph, but only 13.67 @ 105mph stock if I recall correctly.
My point is that dyno numbers vary greatly. From what I've seen, and
I've seen a lot, these "dyno freaks" don't run the number at the track
which leads me to believe they really aren't freaks.
It ET'd 12.58 @ 113.50 with headers and gears and ET'd 12.20 @ 115.55 with a small cam and a few times 11.92 @ 117 11.91 @ 116 *fiance driving it into the 11's)
I still don't believe in dyno numbers, as you can see I have no idea what my new motor tosses down plus it's still breaking in..........but track #'s do the real talking
