BMR Suspension Releases New Product - Tubular Lower Control Arms (TCA002)
07-31-2014, 01:39 PM
#1
LS1Tech Premium Sponsor
Thread Starter
iTrader: (6)
Join Date: Jun 2004
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
BMR Suspension Releases New Product - Tubular Lower Control Arms (TCA002) BMR Suspension Releases New Product
Third and Fourth Gen F-Body and G-Body Tubular Lower Control Arm
TCA002 - $219.95
Reduce wheel hop, launch harder, and add cornering consistency to your Third and Fourth Gen F-body or 1978-1987 G-body with Adjustable Lower Control Arms from BMR Suspension. These on-car-adjustable round-tube control arms are manufactured from 1.25-inch, 0.120-inch wall DOM tubing, which dramatically increases strength over the stock stamped-steel arms, while remaining an economical option for improved handling. The BMR Lower Control Arms (PN TCA002) use greasable, 95-durometer, spiral-fluted, polyurethane bushings, leaving you with a solid, more responsive feel over the factory rubber bushings. Combined with reduced control arm flex, the handling of your F-body or G-body will be much more predictable and consistent on the street and on the track. Installation time is 1-2 hours. Available in black hammertone or red powerdercoat.
To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Ave, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.
Third and Fourth Gen F-Body and G-Body Tubular Lower Control Arm
TCA002 - $219.95
Reduce wheel hop, launch harder, and add cornering consistency to your Third and Fourth Gen F-body or 1978-1987 G-body with Adjustable Lower Control Arms from BMR Suspension. These on-car-adjustable round-tube control arms are manufactured from 1.25-inch, 0.120-inch wall DOM tubing, which dramatically increases strength over the stock stamped-steel arms, while remaining an economical option for improved handling. The BMR Lower Control Arms (PN TCA002) use greasable, 95-durometer, spiral-fluted, polyurethane bushings, leaving you with a solid, more responsive feel over the factory rubber bushings. Combined with reduced control arm flex, the handling of your F-body or G-body will be much more predictable and consistent on the street and on the track. Installation time is 1-2 hours. Available in black hammertone or red powerdercoat.
To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Ave, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.
08-14-2014, 04:05 PM
#2
If you guy are interested in this part or any other BMR Suspension product just let us know! 
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!