C5 zo6 tach signal wire location
#2
LS1TECH Sponsor
Join Date: Feb 2008
Location: Waco, Tx
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
At the coil connector, should be Pin C White wire(large coil connector, 1 on each valve cover) (color may vary but will be the same pin)
At the pcm, Pin 10 Blue wire.
At the pcm, Pin 10 Blue wire.
#4
I just installed a Raptor shift light. I have a 2002 Z06. The tach signal is
PIN 10, WHITE WIRE. Set it in 4 cylinder mode.
Sorry, confused, about what you are doing with a window switch. I'm guessing you meant tachometer signal wire.
PIN 10, WHITE WIRE. Set it in 4 cylinder mode.
Sorry, confused, about what you are doing with a window switch. I'm guessing you meant tachometer signal wire.
#5
Guest
Posts: n/a
1cyl mode i believe
8969 Instructions
http://www.msdignition.com/Products/...ow_Switch.aspx
If it's one of the non digital one i believe you use 4cyl mode
8969 Instructions
http://www.msdignition.com/Products/...ow_Switch.aspx
If it's one of the non digital one i believe you use 4cyl mode