dnkynrbk

iTrader: (34)

I was sitting around the house today bored and was searching for some nitrous vids and there are some out there but not many posted on this section. So I was thinking we should all post up a your best nitrous video. Just post one with shot size and CI motor.

Here is my old set up. 370 with a Nitrous Outlet D.P. 250 shot progressed. 9.78 et 3598lb PIG.

sheikss

iTrader: (11)

can't view it.

brokenfly

150 shot...346 ci...weight...3950...
http://www.youtube.com/watch?v=IB9sJ_W6QDY

camscam02

iTrader: (21)

346 with stock heads, 200 at the hit, 9.78 140

http://www.youtube.com/watch?v=Sk3Pn...layer_embedded

87silverbullet

iTrader: (11)

Damn! cam it looks like you spun a little bit on that pass and still cut a 1.36 sixty foot!

camscam02

iTrader: (21)

it needs a little wheel speed to get moving. We are looking for high 1.2s next time out with the 2 step and less weight.

YURVIEW

iTrader: (127)

Well i feel like a terd posting after dynky and Cam, but here's mine.

346 H/C/I HSW 90 plate 100 shot. (stock rear and trans)
11.0 @ 123 1.66

http://www.youtube.com/watch?v=GriaXwyhjXM

Maybe I'll be there one day, guys

dnkynrbk

iTrader: (34)

Who cares man post up. Its always nice to see vids of nitrous F bodys no matter what time you run. Heck I think it gives people on here a goal to shoot for.

robsquikz28

iTrader: (246)

Cam that is a bad bitch.

n20kid

iTrader: (6)

Just kinda Curious as to what camshaft and stock heads u are running? If u dont mind letting the cat peak out the bag..

camscam02

iTrader: (21)

here is the thread, it has all the info needed on the car. I dont want to jack this thread so if you have any questions pm me or posr in the linked thread.

https://ls1tech.com/forums/nitrous-o...yup-i-did.html

Brian Coles

http://www.youtube.com/watch?v=nlKFP...layer_embedded

Nothing special but thought I would show the "closer to stock" folks out there what a safe small shot will do. This was my first time taking the car to the track. The stock original clutch/hydraulics didn't like the abuse. Had to baby it to keep clutch peddle from sticking on floor. Ran a 13.0@105 with a sorrry 2.25 60ft on a 100 HSW dry shot..

GMMillwright

iTrader: (4)

Old combo: (10.24 @ 136.6) 382 with a 200. 3690 race weight, 17" M&H DRs. 1.502 60 foot.

02sleeperz28

iTrader: (26)

Very nice!

Z8'S

iTrader: (6)

A bunch of parts bolted on and a 100 shot.
http://www.youtube.com/watch?v=d0uma8xPuyM

ATVracr

iTrader: (5)

Shiz's old car...

3500lbs. , 408 iron block, AFR heads , Pro flow plate, 350 shot ....

http://www.glenburnieracing.com/videos/gb4.asx

8.91 @ 152mph
And drove it home from the track.

dnkynrbk

iTrader: (34)

DAM sweet pass

ericg69ss

Here are a couple on my old set up. 427 C5R block, Ported 243 LS6 heads, solid roller, 13.5-1 compression at 3460lbs race weight on 275 Drag Radials. These were on a dry direct port single stage 200, no progressive, full hit coming on at 3700rpm.

http://www.youtube.com/watch?v=a54Zy0Pgovg

http://www.youtube.com/watch?v=eTJe4Rfz8pY

camscam02

iTrader: (21)

hey eric where did you guys leave at rpm wise? pm me if you have too. We were leaving at 4100 right off the converter and I think on the 2 step in the 3000 range it will sixty a lot better.

SuperSlow02

iTrader: (16)

http://www.youtube.com/watch?v=x_ulleBgNy4
Stock 346 with bolt ons
HSW plate 150 shot
stock 6 speed with ls7 clutch
Moser 9" with prostars and 28in ET Streets