.035 Gap on TR6's for my H/C/Spray?
 

I was reading the Colonel's Tech Files http://home.ican.net/~jsetter/nitrous.html#plug and a few other posts around.

I'm running heads/cam/intake/headers/etc. and a TNT 100 shot soon to be 150 shot. TR6 plugs and MSD wires.

Is a .035 gap good for this? TIA!

Re: .035 Gap on TR6's for my H/C/Spray?
 

actually z28kid98.....at a friends house...

i think that is plenty narrow enough. from hearing what Colonel has to say on other similiar combo's, i think that's plenty narrow enough. Maybe even open it up to about .037-.040?

Chris

Re: .035 Gap on TR6's for my H/C/Spray?
 

that sounds ok, i ran .035 on my 100 shot bolt-on car, I repgapped them to about .042 the car felt a little more respnsive after that, with your HP you should be good. and they might open up a little after time. did you start from .060 and subtract .004 for every 50hp you added to you car? i figure heads and cam, plus 150 shot thats about 250 approx extra HP right? so reduce gap by .020 which will put ya at .040

Re: .035 Gap on TR6's for my H/C/Spray?
 

I gapped my TR-6's at .039 and called it a night.

[ December 04, 2001: Message edited by: Brother J ]</p>