NataSS Inc

iTrader: (9)

Could you email me at your earliest convienience? I have a question about your switch set up and what it would cost to duplicate.
Thanks

<small>[ April 19, 2002, 12:32 PM: Message edited by: NataSS Inc ]</small>

Onyx LS1

iTrader: (5)

you have mail <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

NOS powered LS1

me too <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Onyx LS1

iTrader: (5)

lol <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I'm planning on making a few soon, I'll let you guys know when I do. My panel took forever to make. (i actually cut the bottom off of a black plastic box) <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" /> I may draw one up in SolidWorks and see about having a run of them made for me, that way would be much easier and cheaper if enough were made.
It would be a 3 to 5 switch panel (3 or 4 on/off rocker switches and an optional momentary push button) all lighted red, soldered, with a 4/5 circuit fuse block, with custom labels, and wired so that only a single 12v and single ground wire are needed for all switches. -any of that may change
i should have a some done by the middle of May.
i'm trying to learn how to lay carbon fiber, so that is a possibility also. (but a LONG shot) <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
btw you would lose your car lighter. oh well <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

<small>[ April 26, 2002, 02:07 AM: Message edited by: Onyx LS1 ]</small>