How to make seperate fuel system for nitrous.
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: Madison, MS
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
How to make seperate fuel system for nitrous.
I have a TNT F1 kit and would like it to have its own fuel system so I can run some race gas in it and up the jets. I am going to put the tank on the driverside in the vicinity of where the fuse boxes are (I will probably move the fuse boxes to around to make room) now what do I need as far as fuel pump and wiring. I know a lot of people are starting to due this so any info or help would greatly be appreciated. Thanks Jessie
#2
TECH Fanatic
Join Date: Mar 2002
Location: Your Reality Check Bounced...
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
I would personaly put it on the Passenger side where you just do a battery relocation kit to the back...put a 1gallon fuel cell where the battery was, use the Blue high pressure/high volume fuel pump...then plumb a line from the pump to the fuel sylinoid.
pretty easy to do....
pretty easy to do....
#3
The Bull
You can do it on either side. The fuse blocks can be a small challenge, but it would work. Here's a writeup I did that should cover most of your remaining questions. http://www.derty.org/?body=Installs&content=directport
#4
TECH Veteran
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DERTY
You can do it on either side. The fuse blocks can be a small challenge, but it would work. Here's a writeup I did that should cover most of your remaining questions. http://www.derty.org/?body=Installs&content=directport