Lingenfelter RPM-002 window switch blowout deal! We are offering our RPM-002 window switch at a huge discount for a limited time only. These boxes go for $109.95, but we are selling them for $79.95. We only have 6 in stock at this price so do not hesitate! Here is a link to them on our site: http://www.lingenfelter.com/mm5/merc...=#.UWgSYL7D_5o Please call or email me to get the special price. Thank you, Ryan |
what about the LNC-2000 that ever gonna go onsale? |
Thats a nice deal. Is that while supplies last? |
Originally Posted by stroked383HSR
(Post 17320344)
what about the LNC-2000 that ever gonna go onsale? |
Originally Posted by Blackpanther99
(Post 17321321)
Thats a nice deal. Is that while supplies last? |
Email sent! |
All emails and PM's responded to. Thanks guys! |
Thanks for the orders guys, keep 'em coming! |
We have a couple of the window switches left. Please let me know what we can do for you! Ryan |
what tach signal wire do you connect for an 09+ ctsV, zl1 or zr1 because not listed in the instructions |
1 Attachment(s) Here is a table for the pinouts. We are in the process of updating the instructions. Ryan |
Thanks. If you guys have tested one on a v2 or those then I'll probably pick one up. The tach signal is tricky on em! |
hi, i sent an email about buying one of these today :) |
https://www.lingenfelter.com/sites/l...ons%20v2.3.pdf i guess it actually doesn't work for ls9 or lsa then... |
RPM signal
Originally Posted by MIGHTYMOUSE
(Post 17405419)
Thanks. If you guys have tested one on a v2 or those then I'll probably pick one up. The tach signal is tricky on em! The RPM-002 can take the RPM signal from the coil pack connections on any of the GM Gen III or IV V8 engines (LS1, LS6, LS2, LS3, LS7, LS9, LSA, L92, LY6, etc.). The RPM-002 can also take the tachometer signal wire from the ECM/PCM in any of these applications. If the tachometer signal wire is not already present in the OEM application you would have to add the correct pin to the ECM connector, wire in a pull-up resistor and in some cases enable the tachometer output in the calibration. Hope this helps. |
LSA or LS9
Originally Posted by MIGHTYMOUSE
(Post 17419983)
https://www.lingenfelter.com/sites/l...ons%20v2.3.pdf i guess it actually doesn't work for ls9 or lsa then... Yes, it does. The RPM-002 instructions just don't include the pinouts etc for the LSA and LS9 applications. That is why Ryan posted that updated pinouts PDF that includes the LSA and LS9. See his earlier post with the attached pinouts PDF. |
wonderful ive been waiting for that info all week. calling.. |
I wish this switch also had a WOT activation that's pretty cheap. |
Ryan, i sent you an email. I need a window switch & LNC 2000. Do you offer a special price on the timing computer for LS1 Tech members ? |
Thank you for everyone that participated in the sale. We no longer have any boxes left at the discounted price. Thank you, Ryan |
All times are GMT -5. The time now is 12:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands