Puyallup,wa Moderator?
#1
11 Second Club
Thread Starter
Join Date: Sep 2003
Location: Battle Mountain, NV
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Puyallup,wa Moderator?
Hey guys, was talking with a gentleman from puyallup washington at the track tonight and cannot remember his ID. He drives a red corvette and is a moderator here. I believe his name was Rick. Any insite, I guess i have lost my memory!
#4
TECH Senior Member
iTrader: (2)
Sroblite, (can't remember your name either) up in the n2o freq asked questions is manual for the 5177, page 22 wiring. As you can see if it was wired like they suggest, the wot sw would be your ground on the low amp side. So, #86 is switched ign 12v in and 85 is out to wot sw and then ground. With no power at 86, like we determined, when arming switch is on (sw has a light), there must be a break in the wire or a fuse somewhere inline. I have to go out to doctor and Chevy dealer (build sheet on new C6 Z06), but should be back by 5:00. If you want to come over we can figure it out. I'll pm you my number. If you get a chance before coming over see if you can find where your interior wires are coming through the firewall. We can get the bottle heater wiring figured out also.
Robert
Robert
#5
11 Second Club
Join Date: Nov 2001
Location: NE PA
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by strobelite
Hey guys, was talking with a gentleman from puyallup washington at the track tonight and cannot remember his ID. He drives a red corvette and is a moderator here. I believe his name was Rick. Any insite, I guess i have lost my memory!