Nitrous Dave's Plate users inside please
 

Whats the largest size shot you have personally used with this kit?


Thanks in advance

150 for dyno (worked great :devil: ), 125 was what I was using for the second part of my two stage. I have not gotten to the track yet.

200 just going to dyno to mon. a/f when we go 225

I have helped several customers spraying 300 through it.. So they are out there..
I suggest anything over 250 going directport...
Dave

currently 150jets are in it. when/if i upgrade the lines and sort my fuel system out i will spray a solid 200rwhp through Dave's Plate.
eventually lookin to spray 250-300rwhp in a dual stage setup. season doesnt start till Feb. so i have time to plan and build my setup.

PLEASE keep us updated when you pop the 225's in there....im very interested in the results

I sprayed a 200hp shot through mine on the dyno and the jetting wasn't fine tuned enough for me to safely run all the way through the dyno pull! I make a bit over 400rwhp on motor and I mad like 570rwhp with the 200hp jets with like only 800rpms of spray...........if that makes sense. :)

I have since bought additional fuel jets to fine tune my system for a 200 shot, but I have yet to do so. I need to install my wideband commander first! Not to mention I screwed up my clutch the last time I was out at the track so thats my priority right now. :bang:

I had a 150 and a 175.

my normal shot is a 150 through the plate but i have run a 200 shot through it

any further details on when you ran the 200 shot? (how many times,results,problems? etc.)

anyone have a pic of plate and cost of plate??

http://www.retrorelics.net/jim/Board...Davesplate.jpg

http://www.retrorelics.net/jim/Board...fuelwcover.JPG

Here is a Vid i did for a benchflow...

Bench Flow Vid


Beer

looks like what I was looking for. I will try to find a used plate if I can.

bump...... looking for more results in the 175+ range

:funny: at your avatar

Slightly off topic.............. I just recieved my Nitro Dave Plate (90mm) today and.....




The pics (in post 12) dont do this thing justice (imo) this thing looks SWEEEEET..

Hey that makes 2 of us, I just got my kit in yesterday from last month's deal. It's a beauty! Going to be a fun winter installing that. And even more fun in the spring using it :D

Hey guys I am glad to see you were happy with the system. You now can see the the quality we put into our builds and designs..
Dave

:judge:

Anymore?

We have not dynoed the 200 or 225 yet. Sorry - i'm as interested as you in the results!! :)