If I were to buy on of the single stage plate kits,Could I use a lower fuel pressure of around 10-15 PSI coming from my stand alone?(With the correct jetting of course) or will it only work with the stock FP of 58 PSI?

 

i'm running mine through a low press standalone fuel system and it seems to do fine. i asked dave before and he said it "should" be ok but i think i was one of the first to do it. i think mine was flowing around 12psi - 150shot ended up with a 62/49 jet, a/f around 11:1 on the dyno (both banks).