LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Nitrous Oxide (https://ls1tech.com/forums/nitrous-oxide-10/)
-   -   Need Nitrous Tune For Hp Tuner's (https://ls1tech.com/forums/nitrous-oxide/717858-need-nitrous-tune-hp-tuners.html)

GreatWhiteHype01 May 20, 2007 10:22 PM

Need Nitrous Tune For Hp Tuner's
 
need Nitrous Tune For Hp Tuner's

I Need A Nitrous .bin File For Hp Tuner's If Anyone Has One? I Have A 2001 Camaro Z28, A4 With The Following Mods:

Slp Ram Air
Smooth Bellows
Tb Coolant Bypass
Ported Maf
Ported Polished Tb
Ls6 Intake Manifold
Msd Coils
Accell 300+ 8.8 Wires
Ngk Tr6's
Slp Stainless Long Tubes
3" True Duals, No Cats Or Mufflers
Vette Servo
Custom N/a Tune With Torque Management Delete
3.73 Auburn Posi Unit
2600 Trailblazer Stall Converter
Bfg Drag Radials

I Need A Nitrous Tune That Allows Me To Run Somewhat Decent On The Motor. I Am Willing To Pay For The Tune. Thanks. -tom.

Noyzee May 21, 2007 07:14 AM

what nitrous set up?
if its wet, realy all you need to do is pull a bit of timming depending on what the shot is.

GreatWhiteHype01 May 21, 2007 04:40 PM

I have a 100 wet shot, however it runs horrible on the bottle. They pulled some timing out when they installed the kit. Not sure what the problem is....

Nitro Dave's Nitrous Outlet May 21, 2007 05:35 PM

Sounds like you need to go have a real tune. This is not a area to get cheap in. Do it right and it will be cheaper in the long run.
Dave

Robert56 May 21, 2007 06:45 PM

Did you look in the files in the sticky in PCM section. I think it's Horist that has a data base going. But like Dave said, get a re-tune. Though the data base can be a great tool for comparing and getting insight, however, finding your exact combo is going to be tuff. I have a total of about 17 different tunes from my car, so each change can make the prior tune obsolete.
Robert

99Silverado5.3 May 22, 2007 02:17 AM


Originally Posted by Noyzee
what nitrous set up?
if its wet, realy all you need to do is pull a bit of timming depending on what the shot is.

+1...


All times are GMT -5. The time now is 04:00 PM.


© 2026 MH Sub I, LLC dba Internet Brands