|
Dave's Dual Stage Plate System??? Hello all! I am about to install Dave's Dual Stage Plate System on my 03 Z06 LS6. I am VERY interested to see pics of your installs especially noid placement. I prefer under the coil covers but don't know if its' possible?? Please post pics :judge: Yes, I did a search for pics but spent 1/2 day and no luck :cry: Thanks Liz :) |
*ttt* |
Hello! TTT |
I know if you look on Dave's site you can see some install pics of Corvettes but I am not sure I have seen one with the solenoids hidden like you request. |
Thanks Tony! TTT |
I will look and see what I have stored away on the store computer tommorow. Bare with me I just got back from Idaho so I am playing catch up. Dave |
That would be great! Thanks dave! Liz |
|
|
Ray you are THE BEST! :) |
|
Do a search for 00Vette and Beer, they both have the plate kit on C5's. Also, look in my sig to see what to expect with a n2o shot on the Z06. Remember to post your times over at vetteforum in the Z06 section, in the stickies. :) Robert |
Hi Ms Eliz! If you want to hide the noids, the instruction set for the NOS plate is a good reference for hiding both the fuel and Nitrous Noid for a single stage. http://www.holley.com/data/Products/.../199R10361.pdf Look at Page 10 for the Corvette Noid Instructions. You have probably seen the pics of my setup already since your on the corvetteforum as well (Dave's Single Stage Plate/ Dry Two Stage). Dave, Ray and Chris at Nitrous Outlet are great to deal with, as well, you need to hit Dean @ Dynotune up for the gauge's for you panel plans. |
Originally Posted by Robert56 Do a search for 00Vette and Beer, they both have the plate kit on C5's. Also, look in my sig to see what to expect with a n2o shot on the Z06. Remember to post your times over at vetteforum in the Z06 section, in the stickies. :) Robert I have read almost every post you've made in the last 6 months! Espescially enjoyed the many debates, it's a great place to test convictions and knowledge v. beliefs and assumptions. I did all the searches and have been busy reading old and new. Thanks for all the information...I have learned more here than reading any of the 3 books I've bought on N2O. Well, LSX related anyway... :) Thanks again, Liz:drive: |
Originally Posted by Beer99C5 Hi Ms Eliz! If you want to hide the noids, the instruction set for the NOS plate is a good reference for hiding both the fuel and Nitrous Noid for a single stage. http://www.holley.com/data/Products/.../199R10361.pdf Look at Page 10 for the Corvette Noid Instructions. You have probably seen the pics of my setup already since your on the corvetteforum as well (Dave's Single Stage Plate/ Dry Two Stage). Dave, Ray and Chris at Nitrous Outlet are great to deal with, as well, you need to hit Dean @ Dynotune up for the gauge's for you panel plans. Sent you another e-mail a little while ago. I went to Dynotune and revisited their selection of gauges today. I'll be calling them to see what sending units I'll need to go with the gauge i'm looking at. Thanks for the Holley link, I'll print and get started on my install Saturday. Got my second box od goodies today. WOW! It's like X-mas in May! The 860 Bottle heater, my Plate, the noids, my NX opener...geez the list goes on! Yesterday m,y first box was just the bottle and a tee-shirt LOL, not a lot of playing to do with that :eyes: I've got all the stuff lined up in my livingroom and spread out for my install stategy, can you tell I'm giddy? Anyway, Thanks for all the help! Have a great night, Liz |
Originally Posted by Ms Eliz Hi Robert! I have read almost every post you've made in the last 6 months! Liz:drive: LOL and then to double up on a WET Plate after reading six month's of Robert's Dry vs Wet ... There's some irony here for sure! :jest: J/K there Robert :D |
:rotflmao: LOL and then to double up on a WET Plate after reading six month's of Robert's Dry vs Wet ... There's some irony here for sure! :jest: J/K there Robert :D[/QUOTE] Glad you two are around, I like to watch the fun! :bang: :secret: :buttkick: :nutkick: |
Originally Posted by Beer99C5 Oh my! You did that and still have your sanity? :devil: LOL and then to double up on a WET Plate after reading six month's of Robert's Dry vs Wet ... There's some irony here for sure! :jest: J/K there Robert :D Robert :jest: |
Originally Posted by Robert56 I don't think your my favorite custom sw panel maker any longer. :judge: Robert :jest: :chug: |
| All times are GMT -5. The time now is 01:31 AM. |
© 2026 MH Sub I, LLC dba Internet Brands