|
who's interested in a custom NX style switch panel I found the company that makes switches exactly like the NX switch panel. As most of you know, the NX panel works great, for NX products, but different aftermarket accesories use different wiring configurations, which are not always compatible with the SPDT, SPST (mom) and DPDT (mom, mom) switches that come in the NX panel. (mom) = momentary I am gauging interest in custom assembled panels, just like the NX one, but your choice of switches, (and more affordable too) Switch styles available. SPST SPST (mom) SPDT SPDT (mom, mom) DPST DPST (mom) DPDT DPDT (mom) .....(used for NX openers, or Electric cutouts) SPTT (triple throw) and then lighted versions available too SPST (light) SPDT (2 lights) DPST (light) DPDT (2 lights) switch colors are as follows. black. (no light) black w/ red lense for light black w/ amber lense for light black w/ green lense for light black w/ 2 red for light Also available in red switches, red (no light) red w/ red light red w/ amber light red w/ 2 red lights. Pricing is not yet setup, just gauging interest in these panels. Thanks. Ryan :D |
Re: who's interested in a custom NX style switch panel How many switche scan be installed in the panel? 1x Arming 1x Heater 1x Purge 1x Remote Opener 1x Fan Hi/Lo/Off What else??? But that would be worth it! |
Re: who's interested in a custom NX style switch panel the NX is a 3 position panel. These are the exact same switches, with a lot more options on how they are wired. (i.e. you can have your arm and heater on one switch, like NX uses) or have seperate switches for all. Stock 3 fit as good as the NX panel does. However, they are modular units, and if you dont mind cutting your panel, im sure 5 could fit across. I dont think you could do only 4, as the cigarette lighter hole will get in the way. They do have "Blank filler" plates, for unwanted switch positions, so if you dont mind losing your cigarette lighter, you could do 5 across, and use one filler. Ryan |
Re: who's interested in a custom NX style switch panel These switches can be bought from http://www.waytekwire.com Look for Switches, Contura rocker. Here's the catalog pages for them: http://order.waytekwire.com/IMAGES/catalog/215_36 http://order.waytekwire.com/IMAGES/catalog/215_37 Do you think you can get enough interest to buy in bulk for the discount? Eric |
Re: who's interested in a custom NX style switch panel I found the company that makes switches exactly like the NX switch panel. |
Re: who's interested in a custom NX style switch panel that is what i am trying to find out, if there is interest. They sell some of the switches i have available, but not all, There are TCS switch covers available in the same line, so the Bird guys w/ TCS, you can add a 2 position panel, and keep a TCS switch. also, waytech, has a $5/ item minimum order, so to build a NX clone panel, will cost an individual around $50 with shipping. I will also be designing plug and play wiring harnesses for N20 setups to go along with the switch panels. Ryan. |
| All times are GMT -5. The time now is 06:50 AM. |
© 2026 MH Sub I, LLC dba Internet Brands