Making some progress on my Nitro Dave's LT1 plate install
#1
Staging Lane
Thread Starter
Join Date: Mar 2007
Location: Canada
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Making some progress on my Nitro Dave's LT1 plate install
I've been hoarding parts for way to long, but things are finally starting to get done.
This spot here is what got me to thinking.
I put my "Foose" skills to work and created this masterpiece.
Alright "masterpiece" might not be the right word, but it got the job done.
Installed the block off plates.
Mounted the bracket.
Installed the solenoids.
Threw a few parts on to mock everything up again and this is what I got.
Then I was pumped and had to half *** the intake onto the motor and see what it looked like. Hell I even threw on the engine dress !!
Hard to believe all I have done is install the plate and noids. At this rate, it's going to take me the rest of the year to finish !!
Later,
Brad
This spot here is what got me to thinking.
I put my "Foose" skills to work and created this masterpiece.
Alright "masterpiece" might not be the right word, but it got the job done.
Installed the block off plates.
Mounted the bracket.
Installed the solenoids.
Threw a few parts on to mock everything up again and this is what I got.
Then I was pumped and had to half *** the intake onto the motor and see what it looked like. Hell I even threw on the engine dress !!
Hard to believe all I have done is install the plate and noids. At this rate, it's going to take me the rest of the year to finish !!
Later,
Brad
Last edited by PistonHead; 08-09-2014 at 03:49 PM. Reason: Pic host changed adress. Finally updated post.