what is the reason for this!?
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Location: Spring, TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
what is the reason for this!?
so im taking the side moulding off my car and i get the passenger side of with no problems what so ever. the first piece i peel off on the drivers side shows me this! why would somebody have done this? and any advise on how much it will cost to fix? thanks
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Location: Spring, TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
yea i kinda thought that it was used for pulling a dent but what a great thing to find AFTER i had already removed the passenger side moulding! haha and i had a feeling something was going to happen
#5
TECH Junkie
iTrader: (2)
Join Date: May 2006
Location: somewhere that doesn't get snow
Posts: 3,455
Likes: 0
Received 2 Likes
on
2 Posts
seems like an odd place for a PDR drill hole.
i have one on my pass side in the door jam which was used to fix a ding was a bit above that and also one close to the wheelwell about that height. the drill hole in the door jam is plugged with a rubber plug. it looks 100% factory.
i have one on my pass side in the door jam which was used to fix a ding was a bit above that and also one close to the wheelwell about that height. the drill hole in the door jam is plugged with a rubber plug. it looks 100% factory.