Hellfire 3.905" LS1 bore piston rings - 2 sets
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have 2 sets of Hellfire piston rings for the common oversize on a LS1 block. Bore size would be 3.905" - P/N R19114 38MM
Ring thicknesses -
1.5MM Top
1.5MM Second
3.0MM Oil
110.00 shipped to the lower 48 (including Paypal) EACH
These are NEW unused ring sets.
Ring thicknesses -
1.5MM Top
1.5MM Second
3.0MM Oil
110.00 shipped to the lower 48 (including Paypal) EACH
These are NEW unused ring sets.
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thought it was pretty easy to comprehend. Rings are for a 3.905" bore, the common LS1 oversize. Stock bore is 3.897", so it is not .005" over.......or standard. They are for a .008" over, just like 90 percent of the pistons you see from the leading manufacturers of LS1 stuff. Hope this helps you.