LS1TECH - Camaro and Firebird Forum Discussion - Eagle 6.125 H-Beam Rods Mahle 383ci 6cc Forged Pistons Balanced

Up for sale is a set of 8 Eagle Forged H-Beam 6.125" rods with ARP 8740 bolts and Forged 4032 Mahle 3.905 6cc valve relief 4" stroke pistons(no rings included). These pistons are setup to run with a 4" stroke crank and a 3.905" bore to make a 383ci LS. The pistons and rods are in good used condition and are balanced. They were used for 5k miles. There are some small scratches around the wrist pins on the piston from the pin retainers being installed. The scratches will not effect the pistons performance in anyway. There is no other damage to the pistons or rods.

I will be using the 4" stroke crank from this rotating assembly to build a 408. So I am selling these pistons and rods to pickup a higher compression piston setup in a 4" bore for a nitrous motor. Trades forged pistons 4" bore, 76-80mm turbo, let me know what you got.

Eagle H-Beam Rods ARP 8740 Bolts 6.125" length .927" pin

Mahle Forged LS1 Pistons for 4.00" stroke crank (no rings included)
Bore (in)
3.905
Piston Style
Dish, with two valve reliefs
Piston Material
Forged aluminum 4032
Compression Distance (in)
1.105 in.
Piston Head Volume (cc)
+6.00cc
Wrist Pin Style
floating
Pin Diameter (in)
0.927 in.
Top Ring Thickness
1.5mm
Second Ring Thickness
1.5mm
Oil Ring Thickness
3.0mm

http://i143.photobucket.com/albums/r...1/SDC11274.jpg

http://i143.photobucket.com/albums/r...1/SDC11273.jpg

http://i143.photobucket.com/albums/r...1/SDC11272.jpg

http://i143.photobucket.com/albums/r...1/SDC11267.jpg

http://i143.photobucket.com/albums/r...1/SDC11266.jpg

http://i143.photobucket.com/albums/r...1/SDC11268.jpg

http://i143.photobucket.com/albums/r...1/SDC11269.jpg