LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Parts Classifieds (https://ls1tech.com/forums/parts-classifieds-134/)
-   -   Camaro/Firebird Stealth Sub Box (https://ls1tech.com/forums/parts-classifieds/1535009-camaro-firebird-stealth-sub-box.html)

Bulldogwinters 04-09-2012 03:50 PM

Camaro/Firebird Stealth Sub Box
 
Hey everyone I have for sale a Stealth box for sale. It is hand built by myself. Story behind it is I ended up recieving my subwoofer and amp 2 weeks before my purchased sub box, so I built myself one. It is built for a 10" sub, it housed my kicker well. It is sealed well inside and out. Front is carpeted, the back is painted flat black. Already has a terminal cup installed with wires soldered in place. Wires are 14 Gauge i believe. The enclosed air volume is slightly under .75 cu. ft.

Right now as far as I know, the cheapest box you can buy out there is $80, which is the one I bought (and is pictured below for comparison.) In all honesty, the one I built fits better since I fine tuned it to fit.

For price I am asking $60 Shipped If demand arises for it, don't fret I can make another if you're interested. I have enough carpeting to do about 10 more :thumb:

Here is the box installed in my car (Sharpie not included lol)
http://i49.photobucket.com/albums/f2...1/DSCN0288.jpg
And here is the one I'm running right now
http://i49.photobucket.com/albums/f2...1/DSCN0289.jpg

And a picture of the back BEFORE it was painted
http://i49.photobucket.com/albums/f2...1/DSCN0281.jpg

ssnovaturbo 04-09-2012 04:15 PM

Is it made out of 3/4" mdf?

Bulldogwinters 04-09-2012 04:18 PM

5/8's, they were out of stock on 3/4 when I made it and I was too impatient to wait a few more days.

Bulldogwinters 04-11-2012 10:34 AM

Bump. Feel free to make offers if anyone's interested.

Bulldogwinters 04-20-2012 03:23 PM

Bump, Dropped the price a little bit.

ssdungeon 04-20-2012 03:37 PM

Actually you would want to make these out of 5/8 because you can get a little more volume from the thinner wood :) Since the box is so small its plenty strong with the 5/8 plus its lighter.... Great job on the build and GLWS!! At that price if it had been for the other side I would actually buy it. LOL.

Bulldogwinters 04-20-2012 05:55 PM


Originally Posted by ssdungeon (Post 16221164)
Actually you would want to make these out of 5/8 because you can get a little more volume from the thinner wood :) Since the box is so small its plenty strong with the 5/8 plus its lighter.... Great job on the build and GLWS!! At that price if it had been for the other side I would actually buy it. LOL.

Thanks for the info, makes me feel much better! :thumb:

And if I had a design for the other side I'd gladly make one..

redcamaro4140 05-26-2012 10:57 PM

Still for sale?

tnmotown 05-27-2012 10:37 AM

Damn that is a good price! If my cd changer wasn't on that side I would get it. GLWS

Bulldogwinters 05-29-2012 04:19 PM

I sold the original box, and I haven't had any interest in having one built.

lemons12 12-26-2012 07:12 PM

You got one of these right now?

Jadedbird 12-26-2012 09:47 PM

Id be interested in 1

lusting4ls1 12-26-2012 11:07 PM

Same here

tjwashow 12-27-2012 08:17 AM

i am very interested in this! please pm your paypal or something. well workout some details with your product.

Bulldogwinters 12-27-2012 12:16 PM

This thread is 8 months old so I have none on hand.. However I would be able to make some more since it seems as if a few of you are interested, they would be done after the weekend.

OutlawIROC88 12-27-2012 05:53 PM

may be interested in one if i end up keeping my car and you get a couple done for the others. i'll get back to you. free bump

Bulldogwinters 12-28-2012 03:58 PM


Originally Posted by OutlawIROC88 (Post 17010029)
may be interested in one if i end up keeping my car and you get a couple done for the others. i'll get back to you. free bump

Get back to me when you know for sure man.

I've received payment from one person so far and have a lot of interest. I'll be building several this weekend, so for those interested let me know so I can buy more MDF!

1BlackLS1 12-28-2012 04:37 PM

Id be interested in one... Shipped to Raleigh NC?

OutlawIROC88 01-03-2013 05:34 PM

sorry to make you wait like that man, did you end up making any over the weekend? i'll definitely take one from you if you have any.

Bulldogwinters 01-09-2013 12:38 PM

Pm Sent
2 boxes have been built and sold. I'm finishing a 3rd this week if I have time off of work!


All times are GMT -5. The time now is 03:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands