BRAND NEW LS6 parts - cam, pushrods, conrod bolts, etc
 

Last fall I bought a new GM shortblock to replace the blown engine in my CTS-V. Some of the parts were replaced before the engine was ever installed.

REMAINING PARTS:

LS6 connecting rod bolts - I guess these aren't completely new, as they were installed in the crate engine, but they've seen 0 miles. Replaced these with Katech's rod bolts. Looking around online it appears the part number is 11610158, and they go for ~$3 each. $35 + shipping for the full set.

http://www.submariner.org/thepno95/P...od%20bolts.jpg

LS6 pushrods - Kind of like the rod bolts, these are 0 mile parts, but they were installed in the engine, and I put oil on them as I was trying to determine which pushrod length I needed to use. No picture - they look like pushrods. $75 + shipping.

----------------------------------------------------------
SOLD PARTS:
I took the heads off the old engine and had them ported, so the 243 heads off the crate motor are extras. These are complete, untouched, 0-mile 243 heads with yellow valve springs. - $650 + shipping

HEADS SOLD to R Myers!!!

LS2 timing chain - SOLD!!! PN 12586482. gmpartsdirect.com has them for $32, so we'll say $30 + shipping.

LS6 timing chain - SOLD!!! I'll say $20 + shipping for this one.

LS6 oil pump - SOLD TO MOTER!!! This came off the crate engine, as I'm using a Katech ported pump in its place. Again, 0-mile, brand new part. GMPD has these pumps for $81 + shipping, so I'll say $75 + shipping. I'll also include a new pick-up o-ring.

USED PARTS:

Front cover - SOLD!!! This is the front cover off the blown LS6. I'm pretty sure I have a new front seal, so I'll include that. $35 + shipping.

LS6 yellow springs - These are the springs off the old heads, with about 67k miles of use. Honestly, I have no idea what to ask for these. SOLD!!!?

LS6 valley cover - This is off the old engine, so it's got ~68k miles on it. SOLD!!!

All parts will be shipped from 23518. The smaller stuff I'll most likely use a flat rate USPS Priority Mail box, so something in the $6 - $15 range for shipping.

If you have questions about the parts or want to make offers, do so here. Chances are someone else has the same question, so rather than answering the same thing via PM repeatedly, I'd prefer to cover it here. I will be informed via email when you reply here, so don't worry that your comments won't be seen.

Posted all of that and forgot about the cam!

LS6 camshaft - SOLD!!! Came out of the crate engine, replaced with an EPS cam. 0 miles on it, but it does have oil on it from when I was doing my pushrod length testing. The camshaft is $265 new from GMPD, so I'll say $200 + shipping.

Again:
To make it more clear, don't send me a PM, reply here please!

I guess I can do that. Like I said, I don't know what to ask for them. I'll send you a PM with my paypal.

That's definitely fair. I'll shoot you a PM with my paypal.

To be completely honest, I'm wary of selling to someone in Canada with only a few months on the board and only a single post.

Lower than I'm ready to go at this point, and the chain(s) are going to 70ls1chevelle.

Right now, $200 + shipping.

Can I get the oil pickup o ring for 5 bucks shipped?

$60 shipped on the oil pump?

I have an extra, so yes, I can do that. I think they cost less than $5 at the dealer, though!

How about $70 shipped?

Pm replied. Wife got mine straightened out today from previous order. Free bump

Do you still have the cam and springs and the push rods

PayPal offer on heads $600 shipped to 79936

243 Heads
 

Go for $650.00 shipped to 17737 is so let me know pay pal ready. Thanks

200 shipped on cam

Where in VA are you?

Norfolk?

$600 on the 243s picked up.

Put me in line for the heads. Best price shipped to 78731 ?

Do the heads have the sodium filled valves?

243 Heads
 

Do you have the valve covers to go with heads? And second question is what would you have to get for them with the heads?

Let me know thanks.

Roger.

Cam - yes. Springs - spoken for. Push rods - yes.

AFAIK, yes. My understanding is only the early LS6s did not have the sodium filled valves, and this is one of the later crate motors that GM sold.

I'll be using the pretty, clean ones from the new motor on my engine, but I do have the ones off the old engine. $40 shipped? Again, not really sure what to ask for them.

DC area. And looks like R Myers has you beat on the price.

OK. I'll shoot you both PMs with my paypal info.

ill send you some money if you can do 60$ shipped on the oil pump... Pm me your paypal address if your interested

I'll jump in line for the heads if they're not sold yet.

Pm sent on oil pump

Heads and timing chains are gone.