full built th350 for ls1
#1
TECH Apprentice
Thread Starter
iTrader: (84)
Join Date: Jun 2007
Location: Cleveland, TX.
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
full built th350 for ls1
Category: Drivetrain
Price: $1
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
Engine: LS1/LS6
LS Engine?: Fits LS Engine
I just bought this trans a a few months back from a member. It hasn't been run just bolted up. Im gonna get a 4l80e for my project instead.
I will include the spacer and bolts that i bought that are needed to bolt it up to a ls1. they are gm peices. also never run just bolted up
Here is the info from his original thread
"TH350 and converter built by Mike's Trickshift.
Just torn all the way down and freshened.
Went 5.85@118 on this transmission/converter behind turbo LSX.
Converter is set up for SBC, can be used behind SBC, LTx, or LSx
If you use this in an f-body the stock shifter will work, stock driveshaft will work, and the stock transmission cooler lines should work. You will just need a dipstick and to modify your trans x-member slightly.
Trans also has a 3qt B&M pan (with hole drilled for temperature probe). Will include a B&M trans cooler with the sale.
Per Mikes recommendation I kept the forward auto valve body, trans shift smooth and fast, nice to just throw it in drive when cruising or shift manual when racing. Trans does not have speedo gears (does have the bullet though), had to swap those over to my glide. These can be had from TCI for ~10 for the drive and ~10 for the driven gear (or f-body guys can just tag into the abs sensor to get speedo signal!)"
$1k
Last edited by 2001AntiVenom; 09-17-2012 at 09:04 PM.