2001 SLP SS Camaro Part Out - LS6 w/ Tick T56 - Moser 12 Bolt - Firehawk Wheels 10 Attachment(s) 3/10 UPDATE - T56 is sold. Moser 4.30 12 bolt is sold. SLP torque arm sold. Motor pending sale upon pickup on Tuesday. Will take $3000 for roller FIRM. Had the car listed in the vehicle section for a while and got nothing but low ball offers....so time to part it out. No I will not separate body panels, hood, spoiler etc. The body will stay complete as a roller and SS grill will stay with the car, sorry. Car is a 2001 SLP Alpine White SS with Ebony leather interior. Motor was freshened up 2,000 miles ago with a set of 243 heads, .650 dual springs, .614 lift custom grind Comp Cam, brand new LS6 oil pump, brand new LS2 timing chain, brand new GM LS7 lifters, hardened pushrods and all new GM gaskets. Car has SLP long tube ceramic coated headers, SLP lid, SLP strut brace (not pictured), SLP lower control arms, SLP subframe connectors, and SLP torque arm. Exhaust is a full chambered GMMG. Rear is a fresh 35 spline Moser 12 bolt with 4.30 gears and a lightweight spool (12 bolt is SOLD). Rear currently has LT1 brakes because they were needed to clear the Billet Specialties. I probably have a set of LS1 brakes that I can throw in with the car if wanted. Trans was just rebuilt with a Tick 2 kit and installed a new Centerforce clutch at the same time. Also has a new line lock and rear ABS delete kit. Car is pictured with Billet Specialties but they were sold over the weekend and now has a set of Firehawks on it. Also has all new speakers throughout and tweeters in the door panels. Windows are all tinted pretty dark...somewhere around 15%. As for the bad, the passenger door has some rash on the lower rear corner from being opened into a curb and the driver seat bottom is torn. Other than that the car is pretty damn nice. Moser 12 bolt is sold and T56 is pending sale. Open to offers on everything else. And sorry I will not ship the exhaust. Also posted a few pics of the 2002 Z28 that I'll be parting out soon. It has a built motor with FAST 90 setup with built TH350 and 4000 yank stall. Have a black FAST 92 with NW92 TB as well. 336.339.6867 Thanks- Rick |
you have pm on engine |
what do you want on the roller? |
how much for the Fast 92 setup and the wheels? |
how much for the either fast set up? |
Wanna sell just the center console lid? |
Ill take the line lock pm me |
pm sent |
Keeping the headlights? If not, shoot me a pm with a price. |
what shape is the carpet in and how much for it |
What is the status of the t56 sale? |
pm send on the slp lid |
What do you want for the motor? Complete. |
Interested in the T56... Pm me if you have a price in mind, I'm Paypal ready. |
Also interested in the engine. |
PM Sent on grill |
Sorry guys...busy weekend tearing the car down and never got around to replying as I don't get on tech everyday. A lot of stuff sold over the weekend so I'll be updating as things sell. I have over 40 PM's to reply to and will get to all of them tonight. Syris - Pending local sale on the stripped longblock for $1800 2000Hawk#317 - $3000 firm for the roller with title 96AZHAWK - FAST 92 sold over the weekend. $800 firm for the Firehawk wheels and tires Hogan3836 - FAST 92 sold over the weekend for $1100 cash. Still have the FAST 90 complete for $1100. camaroman08 - Keeping the interior 100% complete not willing to part out. GiggleJuiced_SS - Give me a call about the line lock. CamaroFreak - Slowly replying to PM's and will send you a message back tonight. BigMac76 - Keeping the roller complete, so not looking to sell the headlights, sorry. camaro1 - Not parting out the interior, sorry. chuckd71 - T56 is sold pending pickup on Tuesday. red_cap - Slowly replying to PM's and will send you a message back tonight. zeusrotty - Motor is pending local sale for $1800 as a longblock. Rauq - T56 is sold pending pickup on Tuesday. camarodude87 - As stated in the OP, grill will stay with the car. |
Np at all man, nothing ventured, nothing gained. Best of luck. |
Thanks...I part out quite a few fbodys but this one is too nice to tear apart. I have an 02 that ill be parting in about 2 weeks if youre not in a rush for the headlights. |
pm sent |
All PM's replied. To simplify things since I just copied over the listing from when I was trying to sell as a complete car....more or less all that is left is the following: - Complete roller for $3000 (no I will not sell parts of the car as it will stay complete). Subframe connectors will stay with the car as they have been welded even though they are the bolt in version (I have 2 more sets of SLP frame connectors if interested). SLP grill will stay with the car. Car also has lowering springs all the way around that will stay with the car. - Firehawk wheels - $800 FIRM so please stop asking if I'll take less....they are well worth that. - GMMG exhaust and SLP headers - $800 for all. No I will not ship. - Edelbrock Torque Arm - $100 |
Firehawks sold. Car now has stock 16" wheels. |
Interested in h 243 heads.... Drjdvm@comcast.net |
I hadn't planned to part out the motor but would be open to offers. I planned to sell as a complete longblock for $1800. That would be complete from valve covers to oil pan. Less iintake, coil packs and front accessories. |
sent you a pm back |
How much shipped for bolt in Sub frame connectors? |
PM Sent. |
Has the slp lid sold? I'm interested |
Mrmooney - I'll take $220 plus actual shipping. To be honest Greyhound will probably be the cheapest shipping as they are oversized if they go through UPS. What is the closest greyhound hub to you and I can look into the shipping cost. Lid still available. Has a Thunder Racing billet MAF that was heat-fitted into the lid so I would prefer to sell together for $150. Otherwise I would take $60 shipped for the lid but will need to heat it up to get them back apart. |
Sold. |
roller do you still have the roller? $3000? |
What could of springs does it have |
Im looking for exhaust hangers |
Sorry guys, I completely got tied up in moving into my new house and quit checking the site for the past couple months... With the exception of the longblock, everything from this car (including the roller) is sold. However, I do have a 2001 Camaro with TH350 swap and a 1998 Camaro with forged 6.0 / TH400 swap that I may be selling some parts off of in the near future though. Have a couple sets of headers and exhaust kits as well. |
exhaust kits PM sent on exhaust kits. |
Springs ? |
Do you have any LS headers that are larger than 1 3/4"? |
do you still have the seats? if so how much? |
redcamaro4140 - valve springs or coil springs? ssdungeon - Sorry, both the SLP and Hedmans that I have are both 1-3/4" irocbrninrubber - I have a set of front and rear charcoal leather seats from a Trans Am...in overall good shape with wear on the drivers bolster. I'll take $300 for the set. |
camaro1 i got a mint carpet |
hey bud...if you find a 9 bolt, 12 bolt or s60...let me know |
What coil springs |
Do you have a fog light and console lid latch? |
All times are GMT -5. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands