aluminum boost built 5.3 engine, harness & ecu
#1
aluminum boost built 5.3 engine, harness & ecu
All aluminum 5.3 lsx. engine has idle time on it only.
bottom end:
stock crank
stock rods
stock pistons with mahle steel coated rings gapped to .030
all clearances checked
G8 DOD oil pump
Ls2 timing set
TSP CUSTOM boost cam .235/.244 .591/.594 117 w/1.8 rockers
fidanza 12lb flywheel
top end:
862 casting heads
dickey and scoggin .670 lift springs and retainers
comp hardened push rods
harland sharpe 1.8 roller rockers
LS2 intake manifold
92mm TB
Ls9 headgaskets
has f body accessories and oil pan. comes with harness and ecu preprogrammed for start up on ford 36# injectors. was intended for a turbo lsx 280z swap. decided on a different route. Shipping is at buyers expense.
$3,000
link to craigslist ad:
http://austin.craigslist.org/pts/4175718854.html
bottom end:
stock crank
stock rods
stock pistons with mahle steel coated rings gapped to .030
all clearances checked
G8 DOD oil pump
Ls2 timing set
TSP CUSTOM boost cam .235/.244 .591/.594 117 w/1.8 rockers
fidanza 12lb flywheel
top end:
862 casting heads
dickey and scoggin .670 lift springs and retainers
comp hardened push rods
harland sharpe 1.8 roller rockers
LS2 intake manifold
92mm TB
Ls9 headgaskets
has f body accessories and oil pan. comes with harness and ecu preprogrammed for start up on ford 36# injectors. was intended for a turbo lsx 280z swap. decided on a different route. Shipping is at buyers expense.
$3,000
link to craigslist ad:
http://austin.craigslist.org/pts/4175718854.html
Last edited by tater-rbz; 11-07-2013 at 11:20 PM.