|
New 70MM Garrett! 3 Attachment(s) I have a new T4 70mm Garrett for sale. It has been sitting on my shelf for a while. I can not use this at this because I am going for a larger turbo. So this is my loss your gain! Good for stock motors or slightly modified motors. It has absolutely 0 shaft play on either side. Its rated to 650hp!!! These are some of the specs I have on it 70mm 4" Inlet / 2.5" Outlet $275 Shipped through Paypal! PM for further details!!!! |
Sale pending............. |
I got dibbs |
Originally Posted by Ws6Dnero
(Post 17963006)
I got dibbs |
Still for sale!!!!! Get it while you can!!!! |
pm sent |
Originally Posted by LsXRs
(Post 17969619)
pm sent |
Originally Posted by swandude805
(Post 17970343)
any reason this hasnt sold? if i get money in time im interested. |
How do you think this would act on a stock 4.8? I'd be interested. |
money in paypal right now! |
Sold! Sold!!! |
This dude is a lying douche bag. No one buy anything from him. The turbo was actually a T67 w/ a 62mm turbine and a T3 housing.... Here is what he PM'd me....lol. First off let me apologize for what happen with the turbo. I never meant to misinterpret the specs of the turbo but I was just passing the info on to you. I have been reading up on turbos for a while but never actually had a turbo for myself. I did not take the housing off because I believed my (so called) friend when he said it was a 70mm. The only reason why I wont refund the money for the turbo is because I got screwed really bad during this deal which will put me deeper in a hole and he lied about the sizing of all the parts I have. Bad part about it, he wont even return my phone calls or text's. So here's the story........ My friend (actually a school friend) had a LT1 turbo kit for sale. It had 2 turbos 2 intercoolers and all the piping, gauges etc for $1100. So of course I bought it. It came with a 67 and the supposedly 70mm turbo. The 67mm was used on his Z28 setup which made 425rwhp on 10#s. So he bought a larger 70mm which he never go to install. So I thought I got a helluva deal. So after I sold the turbo and numerous other parts (not related to this situation) I was able to afford a new t4 turbo. So I got the turbo and started mocking things up and.............Nothing fitted!!!! The header pipes dont fit the flange is too small on the hotside piping(this is how I found out that the 70mm was not a T4 it was T3 hybrid). So now I have to go and find piping to fix what I initially thought was a great deal. The only thing I got outta the deal was a 2 intercoolers, a ebay BOV, 58mm throttle body, boost controller(dont know if it even works) all for $1k. I found all this out on Monday. I am at the point right now to figuring out if I should go through with the build or just be done at where Im at. I did more research and I think these turbos came off a diesel application. I think the one you have has been rebuilt hence no oil marks, scraps, no exhaust residue. Im sorry again and I know its not right that just because I got screwed over that you have to be screwed too. I believe in karma and I assure you that I did not have a clue about it not being a 70mm. I wouldnt have even sit here and take the time to write all of this so you could understand. With all of that being said I hope you can forgive me for what happened to you. I know it sucks when you expect one thing and get something completely different........... |
This is exactly why i dont FCUK with people with 0 feed back unless I can verify through ebay or something. Ive never seen a negative one feedback score!! Sucks that happened to ya......but at least its only 2xx bucks and not 1K! |
Originally Posted by pwrtrip75
(Post 17986458)
This dude is a lying douche bag. No one buy anything from him. The turbo was actually a T67 w/ a 62mm turbine and a T3 housing.... Here is what he PM'd me....lol. So ya, because he got ripped off, he lied to rip someone else off. Nice. |
Thread restored and LOCKED per buyers request. |
| All times are GMT -5. The time now is 03:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands