Chevy406

iTrader: (12)

Category: Engine - Intake/Fuel
Price: $850
Location (State): AL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

SOLD

For Sale: Set of (8) Bosch 160# high impedance injectors. $850 shipped

I bought these last fall and they came with a flow sheet showing 160 lb/hr flow at 43 psig. I have only used these for driving on the street using 93 octane pumpgas. I changed my mind about trying E85 so I am putting them up for sale so I can use a smaller injector. Once again, the only fuel I have used is pumpgas. Total run time was less than 500 miles. All of the o-rings are still in new condition.

These are the same injectors that FIC sells under part number 160E29. These injectors can support over 1,200 rwhp on E85.

These are the tall injectors that fit LS1 rails and hook up directly to the stock LS1 harness (EV1)
Part number: Bosch 0280158827 - 0 280 158 827

Specifications:
Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85, CNG

I'll add some pictures of the injectors and flow sheet tonight.

Chevy406

iTrader: (12)

Here are some pictures of my injectors that are for sale in this ad:

james97cobra

iTrader: (10)

I just ordered some brand new 100# injectors from fic, and interest in trading?

Chevy406

iTrader: (12)

Thanks for the offer, but I'm going to continue using my 80 lb/hr Dekas with 93 pumpgas and add 100% methanol injection. Right now I need the cash to upgrade my leaky c-clip eliminator rear differential...