Diamond and Manley Pistons and Total Seal rings
#1
Diamond and Manley Pistons and Total Seal rings
Category: Accessories
Price: $300
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
SD-802, 22477, DRP71 B
Here's some pics.
I'm only changing them to change compression for a FI build. All original rings and pins will be shipped with them. They are for a 4.000" bore
$350 shipped.
I also have a set of Manley -22cc pistons I bought from RICEETER on the boards here. They came out of a stock bore ls2 used in a Procharged setup.
They were sold through Scoggin Dickey. They are in the same condition as the Diamonds above and have the following on the bottom of them.
SD5D, 1107, 57014.
Here's some pics.
I was going to use these but opted to go with pistons designed for 1000+hp.
$300 shipped
I also have a full set of Total Seal piston rings (CSH2010-5) for a 4.000" bore with 1.5/1.5/3.0mm groves. I talked with their techs and asked about 4.005. They say there's enough material there to use on a 4.005 if you're doing a ring gap in the low .020's.
Never opened them, and can't use them on the Weisco's I just bought because they use a 1.2mm grove. They sell for $289 through many popular sites.
I'll ship them for $240
#4
Just running it thru a bare bones compression calculator says it's around 10.3 to 1 with a .051" head gasket.
Both were used in a 402. That's where the wear marks on the pistons come from, being pulled part way out the bottom of the bore/sleeve. They could be used in anything with a 4.000 bore.
Both were used in a 402. That's where the wear marks on the pistons come from, being pulled part way out the bottom of the bore/sleeve. They could be used in anything with a 4.000 bore.