4l80e parts: PTC converter, etc
 

Going back to a M6. Need to clear some stuff out. Trans and BMR crossmember is sold.

Disclosure - parts have less then 300 miles on them except the converter (which has less than 20 miles since restall). Trans would not hold in 3rd gear on the bottle and overheated the fluid. Fluid was still redish but smelled burnt. Trans worked fine when removed I have no reason to believe anything was damaged beyond the trans overheating. Obviously don't put the converter in your brand new $4000 built trans - it's priced fairly so you can get it cleaned and/or restalled.

https://dl.dropboxusercontent.com/u/...2014.27.42.jpg

Here is what the trans pan looked like:
https://dl.dropboxusercontent.com/u/...2016.07.09.jpg
https://dl.dropboxusercontent.com/u/...2016.07.11.jpg
https://dl.dropboxusercontent.com/u/...2016.07.15.jpg
https://dl.dropboxusercontent.com/u/...2016.07.20.jpg

$550 PTC - 10 SS LS1 converter: Billet, 21 blade stator, straight fin angle. N/A 4500rpm N20 5000rpm stall on my combo - 10" single disk lock up Retails $795, Less than 20 miles since restall.

https://dl.dropboxusercontent.com/u/...2014.27.29.jpg
https://dl.dropboxusercontent.com/u/...2014.27.42.jpg
https://dl.dropboxusercontent.com/u/...2014.27.51.jpg
https://dl.dropboxusercontent.com/u/...2014.28.05.jpg

$50 madman dipstick tube

https://dl.dropboxusercontent.com/u/...2015.38.37.jpg

PM Sent regarding shifter setup

Shifter, Flexplate and Wiring Harness sold.

Thanks Max and Kyle.

Someone must need a badass N/A-N20 converter for a 4l80!

Hit me with offers on the converter.

Cleaned up thread.

Still have converter, madman dipstick tube and cooler.

Lowered prices

55.00 shipped for cooler, send pm on paypal info if you agree and will send money tonight when I get home.

Sending PM

thanks sent money Andel

Transcooler sold - thanks Andel

Bump - someone must need a converter!

thanks, looks great. left feedback on cooler

Bump need to move this converter.

Converter sold - thanks Ryan

Dipstick sold - Thanks!