corpserodeo666

iTrader: (12)

Category: Engine - Complete Motors
Price: $17000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): IL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4
LS Engine?: Fits LS Engine

I have for sale a brand new LSnext long block built to handle a **** ton of boost. Fast Times built this motor for me to run my 101mm turbo and still be streetable with no issues. Its a complete motor, brand new and ready to drop in! I will not separate and please be serious with these offers this setup cost me close to 24000 to build. Ill include freight if the buyer is serious.

I also have my 2000 TA for sale as a roller. Has 24k miles on body with full stock interior and all the other parts on it are brand new with less than 500 miles on them. The car was put together to run low 8's and drive to and from the track with ease.

Here is the basic rundown of the motor:
-Dart LS Next engine block, iron, 9.240" deck, 4.125" bore, standard
mains, steel caps
-LS Main Studs
-LS Next Block Parts Kit - Includes water and oil plugs & coated
cam bearings.
-Main Bearing Set; LS/Vortec, Race Series, Coated.
-Crankshaft; Lunati, 4.000"
-Connecting Rod Bearings; SBC 2.100" Journal, Hardened, Coated
-Billet Connecting Rods; Maxi-Light #6 Crowerods, SBC
6.125"/2.125"
-Chevy LS Series, -18cc Reverse Dome, 4.125", includes rings &
pin/ring upgrade.
-Custom Roller Cam, LS 3-bolt, Billet Core
-Billet True Double Roller Timing Set; LS Race Series w/Torrington
-Bearing & Chain Damper Cam Bolts; LS
-Severe Duty Roller Lifters; LS w/ Hi Pressure Pin Oiling
-Head Stud Kit; 12-Point, Dart LSNext Block
-LSnext oil pan kit.
-Oil Pump Pickup; LS, Stock Type Pump
-Oil Pump; LS, High Volume, Race
-Valley Cover LS7
-Front Cover LS2
-MAST Black Label LS7 CNC Cylinder Heads; 305cc, 2.250/1.600, 6-bolt.
-Head Gaskets; LS1/6 4.130" Bore, .051"
-LS7 Intake Gasket
-Jesel Stainless Steel Shaft Rocker Arm Set.
-Pushrods; 3/8" 4130 Swedged End; 8.075" OAL
-LS Harmonic Balancer
-LS Damper Bolt and Intake Bolts
-Holley HI-Ram Intake Ported and matched.

Thanks in advance. And again please be serious with your offers. Price updated 9/20/2014

corpserodeo666

iTrader: (12)

Early AM bump.

corpserodeo666

iTrader: (12)

Bump..

corpserodeo666

iTrader: (12)

Bump...

214Chevelle

How much for the shortblock? Just block and internals....no oilpan or adapter rails.

corpserodeo666

iTrader: (12)

I do not want to seperate. PM me a serious offer and I will let you know.

corpserodeo666

iTrader: (12)

Bump.. All PMs replied. Thanks.

corpserodeo666

iTrader: (12)

Bump..

corpserodeo666

iTrader: (12)

Bump..

corpserodeo666

iTrader: (12)

Bump..

MUSTANGBRKR02

iTrader: (91)

Not a bad price at all. Where were you 3 months ago when I ordered a very similar package from LME!

corpserodeo666

iTrader: (12)

Thanks. It took me like 3 months to collect all the parts since there was a bunch on BO from almost all the vendors.

corpserodeo666

iTrader: (12)

PMs replied.

JMBLOWNWS6

iTrader: (17)

If you break up the short block Id be interested in the heads for sure. No tire kicking.

corpserodeo666

iTrader: (12)

If someone is interested in shortblock I will separate.

214Chevelle

....and I asked about the shortblock earlier in the thread, remember. Sooooo.....uhhhhh, what do you think? Especially if the price is right.

JMBLOWNWS6

iTrader: (17)

Nevermind bro. I thought I read 305cc on the heads.

corpserodeo666

iTrader: (12)

PM me your number.

corpserodeo666

iTrader: (12)

Bump..

}Anti_Ricer_X{

iTrader: (1)

If you sale the short block how much for the heads?
What chamber size 50-80 ? I need 70.
Nice set up.