Cams lifters pushrods rockers timing set
08-22-2014, 12:14 AM
#1
Cams lifters pushrods rockers timing set Category: Accessories
Price: $1
Location (State): IN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
- 2001 Corvette cam (from base LS1 with roughly 5000 miles) $125, includes single roller timing set from Advance Auto (used 20 minutes)
- Comp Cams LS1 3726R/3727R HR12 (unused) SOLD
- LS7 Lifters (new unused) - SOLD
- Manley one-piece 7.350 push rods (used to check fitment) $110 ($160 new)
- Lunati VooDoo LS1 Rockers PN: 85425LUN (New in Box) $400 (these are $600 from internet dealers)
So, what's the back story on this? I bought the Comp Cam and Lunati rockers from a friend who needed the dough. They are essentially brand new, but appear to have been stored for a couple of years. The rockers are still in factory shrink wrap and packaging. They are also on sale on Ebay, but I can end the auction for the right offer. The Comp Cam box has seen better days, but the cam is perfect shape (still in plastic bag).
The Corvette cam came from my original LS1 engine, which had about 5000 when I spun a rod bearing. The cam looks fine, and in fact I had it in the replacement engine for about 300 miles until my new head and cam package arrived from Advance Induction.
I bought the timing set from Advance Auto when the new short block arrived before the heads and I wanted to play. It's a nice set and in fact MUCH higher quality than the $70 set being sold by Autozone. The Advance chain is on the right side in the attached pic.
The lifters? I bought a new set... and a friend bought a new set too. Both sets were unpackaged and soaking in oil before we compared notes.
DOH! Anyway, these are GM LS7 lifters.
After careful testing for P2V clearance, the 7.350 pushrods everyone said we just haaaad to go with turned out to be too long. I bought and installed 7.250s instead, but was stuck with the 7.350s too.
So, I'm selling off all the extras. PM me with reasonable offers, and you will likely get the parts.
UPS ground or USPS flat rate shipping is included in the price, but you can also arrange for pickup. I live in NW Indiana and work in Chicago.
Last edited by 1981TA; 09-02-2014 at 09:11 PM.
