Fabricated Turbo Hot Side
#1
Fabricated Turbo Hot Side
Category: Engine - Power Adders
Price: $1300
Location (State): MA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Due to placement of the crossover, you will need a taller intake as a car intake will not fit. Truck intake offers good clearance, as does the Edelbrock pro-flo or any carbureted style with a plenum. Holley Hi-rise may work as well, but the mid rise required spacers and throttle body modifications.
The exhaust manifolds are GTO v-banded down to 2.25" The v-bands are quality stainless pieces from Vibrant.
The crossover is 2.25" 409 wrapped up. It has provisions for narrow band o2 sensors. It is T4 flanged and setup for a single Turbonetics RG45 gate which is included. The dump tube off the gate drops straight down and is fabricated from 304 stainless.
I will also include the fender exit downpipe. The downpipe is 3" v-banded at one end, and coned up to 4" diameter tubing. The downpipe is fabricated from 304 stainless as well.
So for manifolds, cross-over, downpipe, waste gate and dump tube I am asking 1300.00 shipped. The turbo is NOT included in the sale price.
1300.00 shipped
Brandon
413-455-9795
#2
On The Tree
iTrader: (1)
Join Date: Dec 2005
Location: Minnesota
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
This might be a perfect setup for my 1971 Nova transplant. Does it have an intercooler? Will I need a front mounting plate like you have, or can I use the standard mounts I have? Thanks.