4" exhaust piping (misc bends, etc...) - LS1TECH - Camaro and Firebird Forum Discussion

11-12-2014, 01:43 PM

#1

JasonShort

Moderator

Thread Starter

iTrader: (242)

Join Date: Dec 2001

Location: Rochester NY

Posts: 1,810

Likes: 6

Received 19 Likes on 17 Posts

4" exhaust piping (misc bends, etc...)

Category: Accessories
Price: $1
Location (State): NY
Item Condition: Used
LS Engine?: Fits LS Engine

I have quite a bit of 4" diameter exhaust piping that I am looking to sell. It would be perfect for someone building an exhaust and would save you some money since the raw material cost on this stuff can be pricey. Most of this stuff was used on former turbo 4th gen F-bodies.

1. Custom Mufflex 2OTL (two on the left) polished tips for 4" catback. Denny from Mufflex fabricated this to replicate the look of the SLP 2OTL tips. It has a 4" inlet, and the tips are dual, polished, angle cut 2.5". It looks exactly like the 2OTL tips, but just a little larger in diameter. Very cool and unique! SOLD

2. Oval 4" tubing. This is currently in one large piece and was used on a very high hp turbo F-body. The welds are not the nicest, but the tubing is in great shape. Oval 4" tubing is expensive, and this was used to retain ground clearance on a lowered 4th gen F-body. There are a couple 4" round to oval transitions, and a couple 45 degree oval bends. It's about 5' long, so it would probably need to be cut to be shipped. $80

3. Misc 4" strait piping. Used, physically in good shape but could use a little cleaning. I have about 4' of this. SOLD

4. Misc 10-15 degree 4" diameter bends w/straight section. This tubing is brand new. I have two of these pieces and they are about 12" long each with a slight 10-15 degree bend at the ends. SOLD

There are some other misc 45 and 90 degree mandrel bent 4" tubing (and clamps) as well. Let me know what you need.

Thanks!

Last edited by JasonShort; 11-17-2014 at 07:53 AM.

Reply Like