SOLD - ECS Gen V Camaro bracket setup, YSi polished billet wheel + more
 

You are looking at an ECS Gen V Camaro bracket kit. I bought this setup as the Gen V Camaro and the TBSS share the same crank pulley offset and it is a dedicated drive 10-rib system.

What's included:

* Full bracket kit w/hardware.
* Crank pulley to bolt to ATI Damper (you will need to buy ATI Damper).
* HD spring loaded tensioner.
* Supply and drain lines for head unit.
* Air filter
* Original 10-rib belt along with a brand new Green HD belt of the same size
* YSi polished head unit with the billet wheel upgrade. The original head unit alone was $3400 and then $700 to send back to Vortech for the wheel upgrade.
* Pullies: (4.00", 3.12", 2.95", & 2.75")
* Several 3"-4" aluminum tubing, silicone couplers, SS T-bolt clamps.
* Big red Procharger race valve.
* Large A2A intercooler (Treadstone 1245).

You will need to buy a Camaro P/S pump and alternator in order to use this setup, which again is not a big deal and I can even work with you on getting GM parts at good prices.

Asking Price - $5500 shipped ($5665 paypal'd) for everything listed above. There is well over $7k+ listed above and all of this has only had a dozen engine dyno pulls on it.

$4500 shipped ($4635 paypal'd) for head unit, brackets, & pullies

Pics of everything:

http://i262.photobucket.com/albums/i...pstydszqz8.jpg

http://i262.photobucket.com/albums/i...psgaucmj7v.jpg

http://i262.photobucket.com/albums/i...pstg8afox7.jpg

Attachment 657823

http://i262.photobucket.com/albums/i...ps2moogoot.jpg

Back up.

Back up with new lower price in first post. Plus some pics of the blower mounted on the engine.

Attachment 657005

Attachment 657006

Sold.