bcbosley

iTrader: (2)

Category: Engine - Intake/Fuel
Price: $950
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): OH
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I have a set of World Products 025250 Warhawk LS1X 15º Cylinder Heads. I bought these new to use on my turbo 408 build but plans have changed. Had the pushrod holes drilled to fit 3/8 pushrods, which opened a hole into intake runners. Pushrod holes were going to be sleeved with brass tubing, as was a common practice back in the day. I just haven't epoxied in sleeves yet because I wanted to make sure everything fit first, so you will have to. Long story short, my .666 lift cam is to much lift for the rockers I was going to use so with these heads, so I am scratching this plan and redoing everything with square port stuff. Don't know much about these heads, but you might have to run tall valve covers. But they do have 3/4" thick deck and perfect for boost. I bought them bare but now fitted with Manley valves and K-motion springs. They are disassembles now but will come with pair of heads, valve springs, spring seats and shims, titanium retainers with locks, and valve seals.

Text me 330-921-8276


World Products 025250 Warhawk LS1X 15º Cylinder Heads
Material: 355-T6 alloy high density aluminum
Valve Seats: Intake (hardened), exhaust (hardened)
Valve Guides: Manganese bronze
Valve Angles: Int. 45○ / Ex. 45○
Spring Seats: Machined for 1.560"
Int Valve: Manley 2.080” X 5.300” X 5/16” BMP P/N 702830RM
Ex valve: Manley 1.600” X 5.300” X 5/16” BMP P/N 702715SD
Valve Springs: K-motion K-800 1.460 diameter double M-300 spring good for camshafts with up to .700 lift. 165# @ 1.850, 471# @ 1.200, coil bind at 1.085, with titanium retainers and spring seats and shims to set for 1.850" install height
Valve Seals: Manley 24042-16 valve seals
Rocker Arms: Stock OEM LS1 with stock stands
Intake Runner: 235cc, Cathedral port, standard port location
Exhaust Ports: 87cc, standard location
Combustion Chamber: 72cc
Valve Job: Multi-angle intake and radiused exhaust
Valve Angle: Stock 15°
Accessory Bolt Holes: Stock
Deck Thickness: .750"

bcbosley

iTrader: (2)

Bumppp

bcbosley

iTrader: (2)

bummmpp

kpforce1

iTrader: (9)

how much for the heads and valves only?

bcbosley

iTrader: (2)

Pm me an offer.

bcbosley

iTrader: (2)

$950 for heads and valves only