5.3 short block
#1
5.3 short block
5.3 short block
#1
Hey guys i have a spare 5.3 that im not going to use. I took it apart to check Crank journals, bearings, cylinder bores etc.. The crank checks out perfectly still 2.099/2.558 the bearings have normal wear. So everything is completely cleaned up block, crank , rods , pistons. I also have a set of 862 heads that i took apart to lap the valves. I may part with those or not havent decided. Im looking to possibly trade this for a turbo or tranny like turbo 350/400.. I can add some cash if need be. Nothing bigger then a 80mm . Thanks guys. Im building a stock bottom end 5.3 new rings and bearings/ turbocam.. I need a turbo cam if anybody has one. Like a stage 1 or 2
#1
Hey guys i have a spare 5.3 that im not going to use. I took it apart to check Crank journals, bearings, cylinder bores etc.. The crank checks out perfectly still 2.099/2.558 the bearings have normal wear. So everything is completely cleaned up block, crank , rods , pistons. I also have a set of 862 heads that i took apart to lap the valves. I may part with those or not havent decided. Im looking to possibly trade this for a turbo or tranny like turbo 350/400.. I can add some cash if need be. Nothing bigger then a 80mm . Thanks guys. Im building a stock bottom end 5.3 new rings and bearings/ turbocam.. I need a turbo cam if anybody has one. Like a stage 1 or 2
Last edited by jhendo; 02-14-2016 at 03:18 PM. Reason: Remove a sentence