2.9L Whipple Supercharger kit for LS7 with 10-rib belt drive! Price DROP $5,999!
06-06-2016, 05:14 PM
#1
TECH Enthusiast
Thread Starter
2.9L Whipple Supercharger kit for LS7 with 10-rib belt drive! Price DROP $5,999! Category: Engine - Power Adders
Price: $5999
Part Fits: 2010+ Camaro, Corvette, 04+ Cadillac CTS-V
Location (State): VA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
Up for sale I have the COMPLETE LS7 2.9L Whipple supercharger setup. This kit is specifically designed for the LS7 heads/C6 Corvette Z06, and the intake manifold is designed for the LS7. Will fit a Corvette, CTS-V1, and other platforms using the Corvette belt alignment.
The kit new retails for $8,400. This is not your off the shelf kit as I have spent a significant amount of time and nearly $3,000 converting this setup to the much stronger, non-belt-slipping 10-rib serpentine. The 'stock' 6-rib setup simply cannot hold up. The power delivery of the setup is absolutely insane and instantaneous from any RPM in any gear.
http://www.texas-speed.com/p-3232-wh...1-corvette-ls…
My last track day the car consistently trapped in the 146.x mph range and bested 147mph at a 4,000lb race weight, on street slicks, on 14-15psi boost. I cannot provide an exact HP #, but that should give you a good idea of its capabilities on a well tuned setup! I have to imagine it's in the 900whp range to consistently trap those speeds.
Included:
Complete Whipple 2.9L/LS7 Corvette Kit
Whipple Fuel Rails
Full custom 10-rib serpentine conversion using ATI parts (many parts and spacers hand made on a lathe for perfect alignment and fitment)
2nd Gen CTS-V Heat Exchanger.
CBM CNC alternator bracket AND F-body alternator
Water pump with ATI wide glide pulley
2.75" Supercharger Pulley.
ATI 10% overdrive dampener
CTS-V power steering pump with 10-rib pulley installed.
All brackets, idlers, tensioner...etc
Extra belt (or 2).
Depending on buyer, we can work something out for the hood if you own a V1.
If any serious potential buyer has specific questions or wants other pictures feel free to ask.
This will be a bolt on, ready to go setup. The *only* addition you will need will be an intercooler reservoir as each cars needs may be different and my 5-gallon ice box may not be what you need.
*I will warn that that I do not know what engine you will be bolting this to.* The included upper and lower pulleys are *NOT* to be run on a stock LS7 engine, or probably any other stock engine for that matter. It's what I have, so it's what I am including. Whipple has varying pulley size increments to allow you to run the blower speed you need for your specific setup.
$6,500
A little of it in action
$6,500
Last edited by gtistile; 06-26-2016 at 04:35 PM.
